Clamping Collars
SP-343-2-S Industry Standard Clamping Collar, 2-Piece Construction, 3-7/16 in ID x 4-3/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Dodge® 86834 Adapter Assembly
Dodge® 094449 Adapter Assembly
Dodge® 086837 Adapter Assembly
Dodge® 086836 Adapter Assembly
Dodge® 086835 Adapter Assembly
ASP1312-S Industry Standard Clamping Collar, 2-Piece Construction, 1-5/16 in ID x 2-1/8 in OD x 9/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-872-S Industry Standard Clamping Collar, 2-Piece Construction, 7/8 in ID x 1-5/8 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-752-SS Industry Standard Clamping Collar, 2-Piece Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-752-S Industry Standard Clamping Collar, 2-Piece Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-751-S Industry Standard Clamping Collar, 1-Piece Split Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Steel
Black Oxide Steel One-Piece Clamping Collar. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.
ASP-622-S Industry Standard Clamping Collar, 2-Piece Construction, 5/8 in ID x 1-5/16 in OD x 7/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-502-SSS Industry Standard Clamping Collar, 2-Piece Construction, 1/2 in ID x 1-1/8 in OD x 13/32 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-502-S Industry Standard Clamping Collar, 2-Piece Construction, 1/2 in ID x 1-1/8 in OD x 13/32 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-400-2-S Industry Standard Clamping Collar, 2-Piece Construction, 4 in ID x 5-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-300-2-S Industry Standard Clamping Collar, 2-Piece Construction, 3 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-300-1-S Industry Standard Clamping Collar, 1-Piece Split Construction, 3 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Steel One-Piece Clamping Collar. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.
ASP-2932-S Industry Standard Clamping Collar, 2-Piece Construction, 2-15/16 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-250-2-SSS Industry Standard Clamping Collar, 2-Piece Construction, 2-1/2 in ID x 3-3/4 in OD x 7/8 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-2432-SSS Industry Standard Clamping Collar, 2-Piece Construction, 2-7/16 in ID x 3-1/2 in OD x 3/4 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-2432-S Industry Standard Clamping Collar, 2-Piece Construction, 2-7/16 in ID x 3-1/2 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-2372-S Industry Standard Clamping Collar, 2-Piece Construction, 2-3/8 in ID x 3-1/2 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-212-2-S Industry Standard Clamping Collar, 2-Piece Construction, 2-1/8 in ID x 3-1/4 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
ASP-200-2-SSS Industry Standard Clamping Collar, 2-Piece Construction, 2 in ID x 3 in OD x 11/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Recently Viewed
The Grey Pneumatic 3/4" Drive x 1-15/16" Standard Socket (3062R) is a high-quality, heavy-duty impact socket designed to handle demanding tasks. Crafted from premium alloy steel, this socket offers exceptional strength, durability, and resistance to wear and tear.
KEY FEATURES AND BENEFITS:
Durable Construction: Made from premium alloy steel for long-lasting performance.
High Torque Capacity: Ideal for heavy-duty applications requiring high torque.
Impact Resistant: Designed to withstand the force of impact tools without breaking.
Precise Fit: Ensures a secure and reliable connection to nuts and bolts.
Easy to Use: Compatible with 3/4" drive impact wrenches and ratchet handles.
SPECIFICATIONS:
Drive Size: 3/4"
Socket Size: 1-15/16"
Overall Length: 2.76 inches
Bolt Clearance Depth: 1.77 inches
Socket Depth: 1.18 inches
Material: Alloy steel
Finish: Black oxide
3/4-inch drive, 2-7/16-inch 6-point standard-length impact socket. Engineered for heavy-duty pneumatic or cordless impact tools, it is forged from high-quality chrome-molybdenum alloy steel and features the GP High Torque Drive design.
The extra thin wall design allows easy access to recessed wheel nuts where space is limited
Due to the extra thin wall design, they should only be used on wheel nuts where limited torque is applied
For use only with 1/2" drive tools
DO NOT use reducing adapters
Made from high quality chrome-molybdenum steel
3/8" - 24 1/4" MALE THREADED ADAPTER-APXTM24 >
Crosby® 1023047 S-3316 Replacement Hook, 1 ton Load
