ASP-2932-S Industry Standard Clamping Collar, 2-Piece Construction, 2-15/16 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
-
BrandClimax
-
UPC044861631072
-
Manufacturer Part NumberG2SC-293-B
-
CountryUSA
-
FinishBlack Oxide
-
MaterialSteel
-
TypeIndustry Standard
-
Construction2-Piece
-
Screw Size3/8-24 UN-3A x 1 in
-
Width7/8 in
-
SeriesG2SC
-
Inside Diameter2-15/16 in
-
Outside Diameter4-1/4 in
- Easily installed where major disassembly would otherwise be required
- Greater axial holding power than setscrew or 1-piece clamping collars
- Effective on hard and soft shafts
- Without recessed screw
- Design fully engages the shaft without marring
-
UNSPSC31162811
-
Package DescriptionEACH
-
Standards/ApprovalsASTM A108|ASTM A574 Cap Screw
-
Specification Sheet
-
Line Drawing
Recently Viewed
ASP-2932-S Industry Standard Clamping Collar, 2-Piece Construction, 2-15/16 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Dodge® 117714 Stock Bore Taper Lock Bushing, 4-1/8 in Dia Bore, 5-3/4 in Dia Barrel, 4 in OAL, Ductile Iron
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
Browning® 3749256 Taper Lock Bushing, 3/4 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Browning® 3749256 Taper Lock Bushing, 3/4 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 3748506 Taper Lock Bushing, 3/4 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Browning® 1296342 Automatic Torque Limiter, 3/4 in Straight Bore, 2-1/2 in OD, 800 in-lb (1 Spring)/1100 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
GP® 1213D Deep Length Socket Set, Imperial, 6 Points, 3/8 in, 12 Pieces, Molded Storage Case Container
GP® 1213D Deep Length Socket Set, Imperial, 6 Points, 3/8 in, 12 Pieces, Molded Storage Case Container
