L.S. Starrett
Starrett SATIN CHROME PROTRACTORS STR C-183
The Starrett C183 Steel Protractor is a highly useful and accurate tool for setting bevels, transferring angles, small squaring tasks, checking cutter clearances within certain limits, and many other applications. Includes double graduations from 0-180 Deg in opposite directions permitting the direct reading of angles and supplementary angles. The back of the tool is flat for ease of use. The blade can be locked firmly at any angle by the lock nut. The protractor also includes a satin chrome finish for ease of reading and resistance to rust. 6" (0-180 Deg) with Rectangular Head.
Starrett SATIN CHROME CENTER GAGES STR C-391
The Starrett C391 Center Gage features inch graduations, meets the American Unified National Standard and US 60 degree standards. American unified National Standard, 60 Deg.
Starrett RADIUS GAGES STR 178-MA
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
Starrett PIN VISES STR 240-B
The Starrett 240 Double End Pin Vise includes tapered collets. .025-.075" (0.64-1.9mm) Range.
Starrett PIN VISES STR 162-D
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .115-.187" (2.9-4.8mm) Range work.
Starrett PIN VISES STR 162-A
The Starrett 162 Pin Vise feature small handles that allow you to rapidly rotate between thumb and finger when filing small work. .010-.040" (0.25-1mm) Range work.
Starrett NEW STYLE SQUARE LOCK BOLTS STR PT-99006
Lock bolt Assembly.
Starrett MILLIMETERS THICKNESS GAGES/GAUGES STR 467-M
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Thickness Gage, .0.04-5.0mm Range, 13 Leaves.
Starrett MICROMETERS/CALIPERS STR 230-MRL
Starrett® K230MRL Mechanical Outside Micrometer
Starrett MICROMETERS STR T-230-XFL
The Starrett T230XFL Outside Micrometer includes 0-1" range, friction thimble, lock nut, carbide face, 0-1" Range, .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut.
Starrett MICROMETER STR T-216-XRL-1
The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 1", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
Starrett MICROMETER DEPTH GAGES/GAUGES STR 449-BZ-6-R
The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
Starrett HOLDING NUT .375-40 STR PT-16499
100 Ft. Coil, Advanzâ„¢ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
Starrett HIDDEN BLADE UTILITY KNIFES STR S-011
The Hidden Edge Utility Knife keeps the blade safely tucked away when not in use, yet instantly available by simply releasing the safety lock and squeezing the lever to the knife body. The cutting depth is easily and accurately adjusted with a thumb wheel. With a quick release, the blade changes and spares are stored in the lever. Blade changes are fast and tool-free and do not require disassembling.
Starrett HALF ROUND PROTRACTORS STR 193
This protractor can be used with the 47 and 49 universal bevels by setting them against the revolving stud, which quickly and economically converts them into bevel protractors. Protractor has double graduations from 0-180 deg in opposite directions.
Starrett GAGE HOLDING ROD WITH CLAMP MECH STR PT-06784-A
Standard gage holding rod on the 657D mag base, various 657E combinations with indicators, 252 transfer stands and 665 inspection holders. Rod dimensions 3/8" x 9-1/2" (9.5 x 240mm) with clamping mechanism for gripping the indicator lug back.
Starrett ELECTRONIC DUROMETER 02059 STR 3805-D
The 3805D is used to measure the hardness of Rubber, Hard Plastics: Harder grades such as rigid thermoplastics, plexiglass, thermoploystrene, vinyl, sheet, cellulode acetate, thermosetting, Laminates (ie fornica), Other: Paper filled calendar rolls, calendar bowls, etc. (materials that would not normally indent under fingernail pressure, such as a pocket comb or bowling ball). Note: These units are not designed to ASTM specifications and cannot be certified as such.
Starrett DOUBLE END EDGE/CENTER FINDER .500 STR 827-B
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact.
Starrett DIGITAL PORTABLE HARDNESS TESTERS STR 3810-A
The 3810A is a state-of-the-art digital instrument designed to test the hardness of large hard metal parts. Loaded with useful functions such as USB output and a built in printer, the 3810A is an ideal choice for fast accurate hardness testing. This versatile tester can perform tests that easily convert to the most popular hardness scales, including Rockwell, Brinell, Vickers and Shore. The tester is easy to use. Simply load the impact body, place the impact body on your test piece, then push the button to begin testing. The 3810A is designed to test large hard parts. For example, tool steel should be close to 1" thick of solid material. The 3810A comes with a D impact device, calibration block, cleaning brush, manual and a carrying case.
Starrett DIGITAL MICROMETERS STR 216-FL-2
Starrett® 216FL-2 Mechanical Digital Outside Micrometer, 1 to 2 in, Graduations: 0.001 in, Steel, Black Frame/Satin Chrome Thimble
Starrett DIAL INDICATOR POCKET GAGES STR 1010-Z
Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits naturally in the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle. 0-.375" Range, 0-100 Dial, .001" Grad, Flat Contacts.
Starrett DIAL HAND GAGES WITHOUT CASES STR 1015-B
After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. 1" Range, 0-100 Dial, .001" Grad, without Case.
Starrett DEPTH GAGES/GAUGES STR 237
Steel Rule Depth Gage is very handy and can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. Graduations at 32nds, and 64ths. Head Length is 2-5/8" x 1/8".
Starrett CONTACT POINTS SETS STR 25-R
The Starrett Contact Point Set includes: 14 points with #4-48 screw thread to fit AGD indicators; a regular 1/4" (6.3mm) long point; 9 special form points; a 28 shock absorbing anvil; and 3 extra long points 1/2", 3/4" and 1" (13, 19, 25mm) long. The set features high grade steel, hardened and ground. All points are mounted on a convenient aluminum ring for safe keeping and easy selection. Contact Point SET.
Recently Viewed
WALL MOUNT KIT-PNC33223>
#3211 1-1/2" STEEL SINGLE PULLEY-NTL195784 >
12-AMP 250-VOLT 3 AB FA FUSES
5/8" Internal Tooth Lock Washers
.100X2" X 2" SLOTTED STAINLESS STEEL SHIM--PK/5-PRC42260 >
MORSE® 70702 4150 E4 Style Brazed Premium Right Hand Tool Bit, 60 deg Profile Angle, 370E Carbide Tip, 2 in OAL, 1/4 in Dia Shank
