66122 MAYHEW
COLD CHISEL-MAY66122>
Recently Viewed
COLD CHISEL-MAY66122>
GEARWRENCH® 9712 Flexible Head Open End Regular Length Combination Wrench, 3/4 in Wrench, 12 Points, 0/15 deg Offset, 9.764 in OAL, Polished Chrome/Nickel Plated
GEARWRENCH® Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
1-QT (2.5-LB) ANTI-SEIZE SUPERIOR-GRADE COMPOUND-ANT18025 >
Rust-Oleum® 108402 108 System Cleaning and Etching Solution, 1 gal Plastic Screw Top, Pink, Liquid Form
Prep bare concrete for coatings with Rust-Oleum Concrete Saver Cleaning Etching Solution. This dual-action solution helps remove laitance and dissolve grease, dirt and oil while also adding a texture that concrete coatings will adhere to.
3-TON L-90 30'-LIFT CHAIN HOIST-JET101331 >
