L.S. Starrett
Starrett® 910 Micrometer Case, For Use With 221, 226, 226M, 230, 23M, 426, 436.1, 1230, or 1230M Micrometer
This case protects and stores Starrett outside micrometers when not in use.
Starrett® 657AA Indicator Holder, 1-57/64 in L x 1-5/8 in W x 1-29/32 in H Base, 9-21/34 in OAL, 1/4 in Dia x 6 in L Rod
The Starrett 657AA Magnetic Base Indicator Holder is for use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers.
Starrett® 505P-7 Global Series® Combination Dial Reading Miter Protractor, 0 to 360 deg Measuring, 7 in L, Plastic
The 175mm (7") Plastic Miter Protractor takes error-prone calculations out of the process of miter cuts. Tool is ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles and invaluable for home use.
Starrett® 120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The 120 Dial Calipers are the only American made dial calipers. These calipers are used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making these one of the handiest measuring tools available. This caliper has a 0-6" range and .001" graduations with a white dial. Ships in a fitted plastic case.
Starrett V-BLOCK AND CLAMPS STR 567
V-Blocks come in a variety of styles to suit the numerous requirements of machinists. Used for general shop use and layout work, as well as for holding stock in place during light-duty milling, drilling, and grinding operations. All clamp screws have a hole to help secure the workpiece.
Starrett UNIVERSAL SLEEVES STR 58-S
With spindle hole diameters 1/4", 5/16", 3/8" (6.3, 8, 9.5mm). Gripping hole diameters range from 3/32-1/4"used on holders with smaller clamp hole.
Starrett UNIVERSAL SLEEVE STR 57-S
These universal snugs (sometimes called sleeves) provide a convenient means of attaching scribers and test indicator shanks to surface gages. These snugs will fit all Starrett® 57 and 257 surface gages and all test indicator clamps and tool post holders.
Starrett TRAMMEL STR 59-A
The Starrett 59A is very useful for laying out and scribing circles beyond the capacity of ordinary dividers. The trammel heads have a clamping device that firmly holds various attachments. Trammel Heads (2), 2 Points (6"/150mm).
Starrett TOOL AND INSTRUMENT OIL STR 1620
Instrument oil is an extra-fine lubricant made to our specifications and used in our factory to lubricate and protect our precision measuring tools and instruments.
Starrett THICKNESS GAUGES W/STRAIGHT LEAVES STR 66
The Starrett 66 Inch Reading Thickness Gage with straight leaves are used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness.
Starrett THICKNESS GAUGES STR 66-MA
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Metric, 20 Straight Leaves, 12.7 x 77mm, 0.05-1.0mm Range.
Starrett THICKNESS GAUGES STR 66-B
The Starrett Imperial Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 31 Straight Leaves, 1/2 x 3 1/32", .0015-.035" Range.
Starrett THICKNESS GAUGE W/TAPERED LEAVES STR 66-T
The Starrett 66T, Inch Reading Thickness Gage with Tapered Leaves is used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness. 26 Tapered Leaves, 1/2-1/4 x 3 1/32", .0015-.025" Range.
Starrett TAP WRENCHES STR 91-C
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
Starrett SURFACE GAGES STR 57-C
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 12" Spindle.
Starrett SURFACE GAGES STR 257-A
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 9" Spindle.
Starrett SNUG SLEEVE COMPLETE STR PT-18718
Post hole has a 5/16" diameter and 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gage, 57 and 257A and B Surface Gages, on 657A Magnetic Base and Swivel Post Assembly.
Starrett SCRIBERS W/TUNGSTEN CARBIDE POINTS STR 70-BX
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS W/TUNGSTEN CARBIDE POINT STR 70-AX
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS STR 70-B
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCRIBERS STR 70-A
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett SCREW PITCH GAGES 28-LEAF .25-2.50 STR 156-M
The Starrett 156M Screw Pitch Gage includes locking device, 28 leaves, and 0.25-2.50mm range. 60 Deg Threads.
Starrett SCREW PITCH GAGE 30-LEAF(4-42 TPI) STR 6
The Starrett 6 Screw Pitch Gage includes a substantial steel case, a number of folding leaves at both end, and 30 leaves. This model features a 4-42 TPI range.
Starrett SCREW GAGES STR 284
The Starrett 284 Acme Standard Screw Thread Gage is a standard for grinding and setting tools when cutting Acme threads, which have the same depth as square threads but the sides of the threads are at an inclination of 14-1/2 Deg (29 Deg included angle). This form of thread is used extensively and has in many instances replaced the square thread in machine construction. The advantages of the Acme thread is its strength and the ease by which it can be cut compared with square threads.
Recently Viewed
3/8" DR SPARK PLUG SOCKET 5/8" OPG- C
w/Rubber Insert
Country US
Finish Chrome
Material Cold Formed Steel
Head Width 3/4 in (drive side), 7/8 in (opening side)
Overall Length 2 1/2 in
Drive Type Square
No. of Points 6
Drive Size 3/8 in
Drain Size 3/8 in
Wt. 0.21 lb
Measuring System Inch
Opening Size 5/8 in
Drive Type Square
Material Cold Formed Steel
5" GALVANIZED STOVE PIPE COLLAR-JWH428656 >
35-TON HYDRAULIC BOTTLE JACKS
1/4" GLASS AND TILE DRILLBIT-JWH353361>
This tool pouch offers lots of pockets for a variety of tools. Compact and portable so you only have to carry the tools you need for the job you're doing that day. Fits easily on most belt widths. Durable construction for long life.
1"-14 SAE L/H RETHREAD HEX DIES -PDTER677267 >
