Roughing & Finishing End Mills
Drillco 72A108C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A112C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A116C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A120C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/16 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A128C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A132C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A140C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 2 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A148C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 3/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 72A164C 7200 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1 in Dia Cutter, 1-1/2 in Length of Cut, 2 Flutes, 1 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 735A108C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A112C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/16 in Dia Cutter, 1-1/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A116C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A120C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 5/16 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A124C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/8 in Dia Cutter, 1-3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A132C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 735A148C 7350 Center Cutting Extra Long Length Imperial Single End Finishing End Mill, 3/4 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Extra long
Drillco 73A104C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A106C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/32 in Dia Cutter, 9/32 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A108C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A112C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A116C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A120C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 5/16 in Dia Cutter, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A124C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/8 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Drillco 73A128C 7300 Center Cutting Imperial Regular Length Single End Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Recently Viewed
BBI 451825 Partially Threaded Cap Screw, 1-14, 6 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451825 Partially Threaded Cap Screw, 1-14, 6 in L Under Head, 8 Grade, Alloy Steel, Plain
602051 DO-IT-BEST/VELCRO BRAND 2" X 15' BLACK INDUSTRIAL STRENGTH HOOK & LOOP ROLL
INDUSTRIAL STRENGTH, MOLDED PLASTIC HOOK, WATER RESISTANT ADHESIVE
-JWH602051 >
3/3-V-670 3-groove Banded 3-v-670 V-belt
3-GROOVE BANDED 3-V-670 V-BELT - GAT3/3V670>
OIL FILTERS
The worlds first cordless grinder delivers the power of a corded grinder with upto 2X more runtime and upto 10X longer motor life. The M18™ FUEL™ 4-1/2 in / 5 in grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE™ brushless motor provides upto 10X longer motor life and lower cost of ownership. The M18™ REDLITHIUM™ XC5.0 battery pack (not included) delivers upto 4X more runtime and 20% more power. The grinder features REDLINK™ Plus™ intelligence, the most advanced system of cordless power tool electronics, for maximum performance. The 18 V Lithium-Ion grinder's thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side-handle as Milwaukee® high performance corded grinders for maximum durability on the job. Grinding wheel sold separately.
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
