Roughing & Finishing End Mills
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
MORSE® 92366 5929T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 90886 5951T Center Cutting Extra Long Length Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, TiAlN Coated
MORSE® 95075 5968T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 44467 4593 Non-Center Cutting Single End Roughing End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 90730 5943G Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiN Coated
MORSE® 57132 5895 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 44591 4582 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 43278 1895 Double End Non-Center Cutting Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 57932 5943 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 90804 5943T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 43829 1901 Extra Long Length Non-Center Cutting Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 5 in OAL, Bright
MORSE® 58532 5951 Center Cutting Extra Long Length Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, Bright
MORSE® 44981 4613G Center Cutting Regular Length Roughing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, TiN Coated
MORSE® 45306 4640C Center Cutting Regular Length Roughing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, TiCN Coated
MORSE® 44204 4552 Center Cutting Extra Long Length Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 5 in OAL, Bright
MORSE® 45206 4640G Center Cutting Regular Length Roughing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, TiN Coated
MORSE® 43424 1896 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 44256 4553 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 58162 5955 Center Cutting Long Length Single End End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 43401 1896 Center Cutting Double End Regular Length End Mill, 1/32 in Dia Cutter, 3/32 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 57902 5943 Center Cutting Regular Length Single End End Mill, 1/32 in Dia Cutter, 1/8 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 58016 5944 Center Cutting Regular Length Single End End Mill, 1/4 in Dia Cutter, 3/4 in Length of Cut, 2 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, Bright
MORSE® 44564 4581 Center Cutting Double End Regular Length End Mill, 1/4 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/8 in OAL, Bright
Recently Viewed
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
Milwaukee® 49-57-3250 Annular Cutter, 3-1/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49-57-0010.
BLACK FABRIC BELT--X/LARGE 39-46-OK1SS5BLKXL >
Armstrong® 10-209 Deep Length Socket, 1/4 in, 9/32 in, 6 Points
TXT515CT Dodge® Torque-Arm™ II 909001 Heavy Duty Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 100 hp, 25:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
These IRWIN HANSON Adjustable Guide Die Stock Handles maintain alignment for accurate, straight threading. Use for threading hexagon or round dies.
