Needle Roller Bearings
Torrington 2"-ID NEEDLE BEARINGS TOR HJ-324120
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Torrington 25-MM-ID X 42-MM NEEDLE BEARINGS TOR NA-4905
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Torrington 3"-ID NEEDLE ROLLER BEARINGS TOR HJ-486028
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Torrington 3/4"-ID CLOSED NEEDLE BEARINGS TOR M-1212-1
Koyo M-12121 Inch Series Closed One End Uncaged Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 3/4 in W, 4930 lbf Dynamic/8710 lbf Static Load
Torrington 3/4"-ID NEEDLE BEARINGS TOR B-1212
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 3/4"-ID ONE SEAL NEEDLE BEARINGS TOR JT-1213
Koyo JT-1213 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 3/4 in Dia Bore, 1 in OD, 13/16 in W, 3490 lbf Dynamic/4860 lbf Static Load
Torrington 3/8"-ID NEEDLE BEARINGS TOR B-68
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 3/8"-ID NEEDLE BEARINGS TOR B-68-OH
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Torrington 5/16"-ID NEEDLE BEARINGS TOR B-57
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 5/8"-ID NEEDLE BEARINGS TOR B-108
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 5/8"-ID NEEDLE BEARINGS TOR HJ-101812
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
Torrington 5/8"-ID NEEDLE BEARINGS TOR JH-1010
Koyo JH-1010 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 7/8 in OD, 5/8 in W, 2600 lbf Dynamic/3170 lbf Static Load
Torrington 7/16"-ID NEEDLE BEARINGS TOR B-78
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 7/8"-ID NEEDLE BEARINGS TOR B-1412
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Torrington 7/8"-ID NEEDLE BEARINGS TOR B-1416
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 7/8"-ID NEEDLE BEARINGS TOR B-1416-OH
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Torrington 7/8"-ID NEEDLE BEARINGS TOR BH-1416
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 9/16"-ID NEEDLE BEARINGS TOR B-912
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Torrington 9/16"-ID NEEDLE BEARINGS TOR B-97
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Torrington NEEDLE BEARINGS TOR JT-129
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway to the rollers. The small cross-section of the drawn cup bearing provides high load-carrying capability with minimum required space, drawn cup bearings are easily installed with a press fit in the housing.
Torrington NEEDLE BEARINGS TOR JTT-1012
Koyo JTT-1012 Inch Series Caged Open Ends Drawn Cup Needle Roller Bearing, 5/8 in Dia Bore, 13/16 in OD, 3/4 in W, 1980 lbf Dynamic/2910 lbf Static Load
Recently Viewed
SIZE 10 JOINING BISCUITS (EA)-POR5552 >
30239-Y AKRO-MILS YELLOW PLASTIC STORAGE BIN Length: 10.875" Width: 8.125" Height: 7" Capacity: 50 lbs
AkroBins are the industry-leading hanging and stacking plastic storage bin. Heavy-duty, bins stack together or hang from Akro-Mils louvered racks and panels, rail racks, and louvered carts for high-density storage. AkroBins are corrosion-proof and unaffected by weak acids and alkalis. Length dividers are available!
Gardner Bender GAT-3400 Automotive Voltage Tester, 6 to 12 V DC Max Measurable
Used to test DC voltage in automotive applications with DC voltage from 6 to 12 V
36" SHELVES-PNC1H183636C>
The IRWIN VISE-GRIP Original 2-Piece Locking Pliers Set features high-grade, heat-treated alloy steel construction for maximum toughness and durability. Each piece of the IRWIN pliers set has hardened teeth that are designed to grip from any angle and a classic trigger release designed to provide maximum locking force. The set includes 10WR and 5WR locking pliers to suit a wide assortment of needs.
Milwaukee® M18™ 2627-20 Cordless Cut-Out Tool, 3 Ah Li-Ion Battery, 18 V DC, 1/4 in, 1/8 in Collet, Tool Only
The M18™ cut out tool is the fastest, most compact tool in the market. With our 4-pole motor this tool delivers up to 20% faster cuts than other tools in the market. The REDLINK™ Intelligence provides overload protection to defend against abusive situations. The REDLITHIUM™ 3.0 Ah battery provides up to 120 outlet boxes per charge. The best in class ergonomics allow for increased comfort during all day work.
