Torrington 3/4"-ID NEEDLE BEARINGS TOR B-1212
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790202766
-
Manufacturer Part NumberB-1212
-
CountryUSA
-
Load Capacity4930 lb Dynamic/8710 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed3600 rpm Grease/5600 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width3/4 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1 in
-
Bore Diameter3/4 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
HCI Preferred Supplier 32306 Rigid Adapter, 3/4 x 3/8 in Nominal, Hose Barb x MNPTF End Style, Brass
HCI Preferred Supplier 32306 Rigid Adapter, 3/4 x 3/8 in Nominal, Hose Barb x MNPTF End Style, Brass
The DiversiTech 1000-1200 refers to a heavy-duty motor start capacitor specifically engineered for single-phase AC motors and HVAC compressors. It delivers the necessary electrical boost to get demanding hardware up and running smoothly. Core Technical Specifications Capacitance Range: 1000 to 1200 Microfarads (μF / MFD) Operating Voltage: 110 / 125 VAC Physical Dimensions: 2.062 inches in diameter × 4.37 inches in height Operating Frequency: 50 / 60 Hz
12" 90-GA 1500' STRETCHFILM (ROLL)-WHYHBH121590 >
Milton Industries has been producing driveway signals for over 40 years. Driveway signal bells and chimes would not be complete without a driveway signal hose. This 50 ft deluxe rubber driveway signal hose is both UV and oil-resistant. Has a 3/8 in hose ID. Designed for use at service stations, bank/restaurant drive up windows, home garages and/or anywhere seeking an attendant to be alerted.
