Torrington 7/8"-ID NEEDLE BEARINGS TOR B-1416-OH
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790202797
-
Manufacturer Part NumberB-1416-OH
-
CountryUSA
-
Load Capacity7100 lbf Dynamic/14570 lbf Static
-
Temperature Rating250 deg F
-
Maximum Speed4800 rpm
-
Closure TypeOpen
-
TypeOpen Ends Uncaged
-
Width1 in
-
SeriesB Inch Series
-
Outside Diameter1-1/8 in
-
Bore Diameter7/8 in
- Full complement bearings handle high radial load-carrying capability
-
Alternative Part NumberB1416OHPBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Dichtomatik N4.00X096 O-Ring, 96 mm ID x 104 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 67004048 O-Ring, 13 mm ID x 17 mm OD, Nitrile Rubber, 70 Shore A Durometer, Domestic, Custom H-2 x 13
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 241232 Dowel Pin, 5/16 in Dia x 2 in L, Alloy Steel, Plain
Gardner Bender GTF-600N Friction Tape, 60 ft L x 3/4 in W, 15 mil THK, PVC, Black
Gardner Bender GTF-600N Friction Tape, 60 ft L x 3/4 in W, 15 mil THK, PVC, Black
5/16" DIAMETERX2-1/4" SOCKET HEAD CAP SCREWS-HOL72138 >
