Koyo B-1412-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 7/8 in Dia Bore, 1-1/8 in OD, 3/4 in W, 5370 lbf Dynamic/10160 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790197932
-
Manufacturer Part NumberB-1412-OH
-
CountryUSA
-
Load Capacity5370 lbf Dynamic/10160 lbf Static
-
Temperature Rating250 deg F
-
Maximum Speed4800 rpm
-
Closure TypeOpen
-
TypeOpen Ends Uncaged
-
Width3/4 in
-
SeriesB Inch Series
-
Outside Diameter1-1/8 in
-
Bore Diameter7/8 in
- Full complement bearings handle high radial load-carrying capability
-
Alternative Part NumberB1412OHPBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.2
-
Catalog
Recently Viewed
Koyo B-1412-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 7/8 in Dia Bore, 1-1/8 in OD, 3/4 in W, 5370 lbf Dynamic/10160 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Koyo B-1416 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1 Row, 1 in W, 7100 lb Dynamic/14570 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
NIBCO 76-505-01 2-Piece Standard Configuration Ball Valve, 1 in Nominal, FNPT End Style, Standard Port, MPTFE/PTFE Softgoods, Domestic
Apollo™ 7650501A 76-500 2-Piece Standard Configuration Ball Valve, 1 in Nominal, FNPT End Style, Standard Port, MPTFE/PTFE Softgoods, Domestic
Koyo HM903245 Type-TSS Cone, 1-5/8 in Dia Bore, 1-1/8 in W Cone, 0.14 in Max Shaft Fillet Radius, 124 kN Load, For Use With 1-Row Tapered Roller Bearings
Koyo HM903245 Type-TSS Cone, 1-5/8 in Dia Bore, 1-1/8 in W Cone, 0.14 in Max Shaft Fillet Radius, 124 kN Load, For Use With 1-Row Tapered Roller Bearings
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
