Torrington 2"-ID NEEDLE BEARINGS TOR HJ-324120
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790186240
-
Manufacturer Part NumberHJ-324120
-
CountryUSA
-
Load Capacity15000 lbf Dynamic/27500 lbf Static
-
Cage MaterialSteel
-
Temperature Rating250 deg F
-
Maximum Speed5600 rpm Grease/8600 rpm Oil
-
Closure TypeOpen
-
TypeCaged Heavy Duty
-
Width1-1/4 in
-
SeriesHJ Inch Series
-
Outside Diameter2-9/16 in
-
Bore Diameter2 in
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Without inner ring
-
Alternative Part NumberHJ324120PBL125
-
UNSPSC31171505
-
Standards/ApprovalsANSI/ABMA 18.1|ASTM F2246|Military Standard MS 51961
-
Catalog
Recently Viewed
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
1" X 1/2" SCH-80 CPVC SXTEE BUSHING-NIB1838130 >
DixonĀ® SSGV100 Gate Valve, 1 in, FNPT, 316 Stainless Steel Body, Handwheel Actuator
DixonĀ® SSGV100 Gate Valve, 1 in, FNPT, 316 Stainless Steel Body, Iron Handwheel Actuator
2" X 1" SCH-80 CPVC SXTEE BUSHING-NIB1838249 >
1-1/2" X 60-YDS MASKING TAPE-PMAP79011/2 >
ERB 19141 I-85 Standard Slide-Lock Replacement Suspension, 6 Suspension Points, For Use With Omega IIĀ® and Omega IIĀ® Type I Full Brim Safety Helmets, Nylon, ANSI/CSA
The slide lock suspension easily adjusts to over 40 different head sizes between 6-1/2 to 8 in. The suspension material is specially formulated for pliable comfort and strength as well as providing a smooth sliding action.
