Torrington 5/8"-ID NEEDLE BEARINGS TOR B-108
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790206610
-
Manufacturer Part NumberB-108
-
CountryUSA
-
Load Capacity2450 lb Dynamic/4430 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed3000 rpm Grease/4500 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width1/2 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter13/16 in
-
Bore Diameter5/8 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Browning 1-1/4"-ID 4-BOLT TRB FLANGE UNITS BRW FBE-920 X 1-1/4
Browning® E920 series mounted tapered roller bearings feature durable 1-piece non-expansion housings with Type E mounting dimensions and limited misalignment. The E920 series contains setscrew locking collars for easy installation. It also contains a contact face riding seal in order to provide a good balance between contaminant entry, grease retention and friction. Depending on your application requirements, these bearings are available in a wide variety of bore sizes and housing configurations.
Koyo HM804843 Caged Bearing Cone, 44.45 mm Dia Bore, 29.37 mm W Cone, 3.6 mm Max Shaft Fillet Radius, 130 kN Dynamic/140 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Browning® 1222488 Minimum Plain Bore Type C1 Change Gear, 16 Diametral Pitch, 14.5 deg Pressure Angle, 1/2 in W Face, 26 Teeth, 1-5/8 in Dia Pitch, 3/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Browning® 1224450 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 37 Teeth, 3.7 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
