Torrington 7/8"-ID NEEDLE BEARINGS TOR B-1416
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790202780
-
Manufacturer Part NumberB-1416
-
CountryUSA
-
Load Capacity7100 lb Dynamic/14570 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed3100 rpm Grease/4800 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width1 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-1/8 in
-
Bore Diameter7/8 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
50' 14/3 SJTW RETRACTABLE EXTENSION CORD - JWH534129 >
Dodge® 070389 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL 7.56 in OAH
Dodge® 070389 Type S2000 Pillow Block Roller Bearing Unit, 3-7/16 in Dia Bore, 9.38 to 10.63 in L Bolt Center-to-Center, 3-3/4 in Base to Bore Centerline, 13 in OAL x 7.56 in OAH
5-GAL UNIVERSAL TDH J20C HYDRAULIC OIL
FYH® NA212 36 NA Series Cylindrical Insert Bearing, 2-1/4 in Dia Bore, 3.06 in W, 52.4 kN Dynamic/36.2 kN Static Load
FYH® NA212 36 NA Series Cylindrical Insert Bearing, 2-1/4 in Dia Bore, 3.06 in W, 52.4 kN Dynamic/36.2 kN Static Load
