Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
-
BrandKoyo
-
UPC605790213373
-
Manufacturer Part NumberNA4905
-
CountryUSA
-
Load Capacity24.3 kN Dynamic/31.7 kN Static
-
Cage MaterialSteel
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed9700 rpm Grease/15000 rpm Oil
-
Closure TypeOpen
-
TypeCaged Round Bore
-
Width17 mm
-
SeriesNA49 Metric Series
-
Number of Rows1
-
Bearing MaterialHigh Carbon Chrome Steel
-
Outside Diameter42 mm
-
Bore Diameter25 mm
- Thick outer ring provides maximum load capacity and shock resistance with a relatively small radial cross section
- Optimum speed and lubrication-retention capability
- Best used for high radial load applications
- Made from premium high carbon chrome japanese steel
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|DIN 617
-
Catalog
Recently Viewed
Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
3/8" X 5" CENTER PUNCH-ARS70235 >
Ingersoll-Rand 7807R General Duty Right Angle Air Drill, 3/8 in Keyed Chuck, 0.33 hp, 4 cfm Air Flow, 90 psi, 8.11 in OAL
Ingersoll-Rand 7807R General Duty Right Angle Air Drill, 3/8 in Keyed Chuck, 0.33 hp, 4 cfm Air Flow, 90 psi, 8.11 in OAL
Milwaukee® 49-57-1002 Tang Drive Annular Cutter, 1 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
3/4" X 2-1/2" Solid Dowel Pins
1-GAL "LOTION PLUS" HAND SOAP-ML-HC2006GAL>
