Watts Water Technologies
WATTS® Maxi-Flo® 0555180 Silent Check Valve, 2 in Nominal, Thread End Style, Cast Copper Silicon Alloy Body
This 2 inch lead free Maxi-Flo check valve is used in general industrial and plumbing applications to prevent the effects of water hammer in the piping system. It provides a silent operation with low pressure drop and can be installed horizontally or vertically. This valve consists of a lead free brass body, lead free brass check and adapter, conical lead free brass disc, PTFE seat and threaded end connections. The maximum working pressure rating is 400 psi (27.6 bar), WOG non-shock at minus 20 to 100 degrees F (minus 29 to 38 degrees C) and 15 psi (1 bar) WSP at 250 degrees F (121 degrees C).
WATTS® FD-104P-A5 Floor Drain, 4 in Outlet, Compression Gasket Connection, 13/16 x 3-1/4 in Nickel Bronze Grid, Cast Iron Drain, Import
This Watts Drains epoxy coated, cast iron floor drain is designed for finished floor areas. It features a 5 inch round, adjustable, heel-proof, nickel bronze strainer, reversible clamping collar with primary and secondary weepholes, anchor flange and 4 inch push on connection. This item carries a medium duty load rating.
WATTS® 88005705 LFFBVS-3C-M1 2-Piece Ball Valve, 2 in Nominal, Solder End Style, Copper Silicon Alloy Body, Full Port, FKM/PTFE Softgoods, Import
This 2 inch 2-piece full port lead free ball valve is used in residential, commercial, and industrial applications for potable water and a full range of liquids and gases. It features a lead free brass body with solder end connections, bottom-loaded blowout-proof stem, virgin PTFE seat, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated lead free brass ball, lead free brass adapter and steel handle. Certified NSF-61/ANSI 8, UL listed, and FM approved.
WATTS® 88005701 LFFBVS-3C-M1 2-Piece Ball Valve, 3/4 in Nominal, Solder End Style, Copper Silicon Alloy Body, Full Port, FKM/PTFE Softgoods, Import
This 3/4 inch 2-piece full port lead free ball valve is used in residential, commercial, and industrial applications for potable water and a full range of liquids and gases. It features a lead free brass body with solder end connections, bottom-loaded blowout-proof stem, virgin PTFE seat, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated lead free brass ball, lead free brass adapter and steel handle. Certified NSF-61/ANSI 8, UL listed, and FM approved.
WATTS® 88005700 LFFBVS-3C-M1 2-Piece Ball Valve, 1/2 in Nominal, Solder End Style, Copper Silicon Alloy Body, Full Port, FKM/PTFE Softgoods, Import
This 1/2 inch 2-piece full port lead free ball valve is used in residential, commercial, and industrial applications for potable water and a full range of liquids and gases. It features a lead free brass body with solder end connections, bottom-loaded blowout-proof stem, virgin PTFE seat, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated lead free brass ball, lead free brass adapter and steel handle. Certified NSF-61/ANSI 8, UL listed, and FM approved.
WATTS® 17103031 Quick-Connect Coupling, 1/2 x 3/8 in Nominal, Tube OD End Style, Polypropylene, Import
This 1/2 inch OD x 3/8 inch OD AquaLock(TM) mini reducing coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
WATTS® 17103020 Quick-Connect Coupling, 3/8 in Nominal, Tube OD End Style, Polypropylene, Import
This 3/8 inch OD AquaLock(TM) mini coupling works with plastic or soft copper tubing. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
WATTS® 0959191 35 Series Quick-Connect Straight Reducing Stop Valve, 1/2 x 3/8 in, CTS, Import
This 1/2 inch CTS x 3/8 inch CTS AquaLock(TM) plastic straight valve works with copper, CPVC, PEX, and CTS rated pipe. It is easy to install, no tools or tube inserts are required. The fitting can be used for hot and cold water applications. The unique O-ring guide feature provides a zero-leak connection. Unlike barb fittings, this fitting joins the tubing on the outside, increasing the flow capacity. After a connection has been made even under maximum pressure, the tubing is able to swivel, making the fitting ideal for vibrating and dynamic applications.
WATTS® 0887130 RK 909-RT Total Rubber Parts Repair Kit, For Use With: Model 909 3/4 to 1 in Backflow Preventer Valve
This reduced pressure zone complete rubber parts kit for the 3/4 to 1 in 909 Series consist of disc assembly, seat O-rings, relief valve diaphragm, relief valve O-rings, piston O-rings, cover O-rings and lubricant.
WATTS® 0864942 Repair Kit, For Use With Model LF25AUB/LF25AUB-Z3 1 in Water Pressure Reducing Valve
This repair kit includes parts needed to repair a 1 inch water pressure reducing valve that is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. This kit consists of a diaphragm and diaphragm liner, O-ring, union gasket, strainer, strainer plug gasket, bottom plug gasket, disc and seat.
WATTS® 0794069 LFRK 909-RT Complete Parts Kit, For Use With Model 009/LF009 3/4 and 1 in Reduced Pressure Zone Assembly, Rubber
This total rubber parts kit is used for replacing or repairing the relief valve assembly on a 3/4 and 1 inch lead free reduced pressure zone assembly series 909 used to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. This kit consists of a diaphragm, two molded disc assemblies, two seat O-rings, RV O-ring, two piston O-rings, RV stem O-ring, flow tube O-ring and cover O-ring.
WATTS® 0780322 Heavy Duty Float Valve Stem, 1/4 in NPT, Brass
This 1/4 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 1/4-20 inch NPT threaded ends for valve and float.
WATTS® 0780320 Heavy Duty Float Valve Stem, 5/16 in NPT, Brass
This 5/16 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 5/16-18 inch NPT threaded ends for valve and float.
WATTS® 0780319 Heavy Duty Stem, For Use With Float Valve, Brass
This 5/16 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 1/4-20 inch NPT threaded end for valve and 5/16-18 inch NPT threaded end for float.
WATTS® 0780318 Heavy Duty Stem, For Use With Float Valve, 1/4 in NPT, Brass
This 1/4 IN OD, 10 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 1/4-20 inch NPT threaded ends for valve and float.
WATTS® 0780007 Standard Duty Mechanical Float Valve, 3/4 in Nominal, Machine Flange x Male Straight Pipe Threaded End Style, 53 gpm Flow Rate, 165 psi Pressure, Import
This 3/4 inch heavy duty mechanical float valve is used in commercial, industrial, and agricultural applications for controlling high capacity water flow and can be tank wall-mounted. It is ideal for use in air conditioning, refrigeration, and irrigation systems. This valve has a bronze body with a machine flange on the inlet side with 3/4 inch female NPT pipe threaded inlet connection and male straight-pipe threaded for locknut outlet connection. It has serrated arms for easy adjustment of water level, bronze long and short arms, replaceable seals, and no-jam single lever action. The maximum pressure is 165 psi (11.4 bar).
WATTS® 0650271 35 Series, 3540B-10 Quick-Connect Type 40 Union Check Valve, 1/2 in, CTS, 250 psi, Polysulfone Body, Import
This plastic union check valve is ASSE 1061 certified for domestic plumbing service. It is designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools.
WATTS® 0590722 FV-4 Automatic Air Vent Valve, 1/2 in Nominal, NPT End Style, 1.45 to 150 psi Pressure, Brass Body, Import
This 1/2 inch automatic vent valve is used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems. It consists of a brass body construction with female NPT connection, brass cover, air vent with silicone rubber seal, polyethylene float with valve plug, and automatic vent. It has a high temperature rating and is ideal for use with glycol systems or for use as an anti-vacuum device. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. It can be disassembled for inspection and cleaning. The maximum pressure is 150 psi (10 bar).
WATTS® 0555224 LFB6780M1 2-Piece Diverter Ball Valve, 2 in Nominal, FNPT End Style, Bronze Body, Full Port, PTFE Softgoods
This 2 inch lead free two-piece full port diverter ball valve with threaded end connections is used in commercial and industrial applications designed to divert a full range of liquids and gases. The full port orifice ensures minimal pressure drop, while PTFE seat and chrome plated lead free brass ball provide lasting service. The temperature range is 0 to 350 degrees F (minus 18 to 177 degrees C) at 50 psi (3.5 bar). The maximum working pressure is 400 psi (28 bar) WOG non-shock at 100 degrees F (38 degrees C), 125 psi (8.6 bar) WSP.
WATTS® 0555113 2-Piece Ball Valve, 1-1/4 in Nominal, Solder End Style, Silicon Alloy Body, Full Port, Fluorocarbon/PTFE Softgoods, Import
Series LFFBV-3C, LFFBVS-3C Lead Free 2-Piece, Full Port, Brass Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. They feature a bottom-loaded blow-out proof stem, virgin PTFE seats, thrust washer, and adjustable stem packing gland, stem packing nut, chrome plated brass ball, copper silicon alloy brass adapter, and steel handle. Model LFFBV-3C has threaded end connections. Model LFFBVS-3C has solder end connections.
WATTS® 0545001 GBV 2-Piece Ball Valve, 3/8 in Nominal, NPT End Style, Brass Body, PTFE Softgoods
This 3/8 inch two-piece brass gas ball valve with female threaded end connections is used in residential and commercial applications for natural gas and LP gas on in-house and indoor piping systems. The valve features brass body construction, virgin PTFE seats and seals, brass end piece and plug, and zinc alloy handle. The temperature range is -20 to 125 degrees F (-29 to 52 degrees C). The maximum working pressure is 5 psi (34 kPa).
WATTS® 0372271 530 Calibrated Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 300 psi Pressure, Brass Body
This 3/4 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with 3/4 inch NPT threaded male inlet and 1/2 inch NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
WATTS® 0371271 530C Calibrated Pressure Relief Valve, 1/2 in Nominal, MNPT x FNPT End Style, 50 to 175 psi Pressure, Brass Body
This 1/2 inch calibrated pressure relief valve is used in commercial, residential and industrial applications to protect against excessive pressure in systems containing water, oil, or air. It consists of a bronze body construction with NPT threaded male inlet and NPT threaded female (drain) outlet connections, stainless steel spring, brass bonnet, Buna-N disc, and Buna-N O-ring. Series 530C has a calibrated adjustment feature for setting the valve to the required relief pressure, and is ideal for bypass thermal expansion pressure relief (not ASME approved). It is for use in fire protection systems. The maximum pressure is 300 psi (20.67 bar). The adjustable pressure range is 50 to 175 psi (3.45 to 12.06 bar).
WATTS® 0220075 77SI Wye Strainer With #20 Mesh Screen, 1 in Nominal, 4 in OAL, FNPT Connection, Graphite Softgoods, Import
This cast iron wye pattern strainer, 1 inch Watts Model 77SI, is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It is used in steam and liquid applications and it is furnished with a machined seat that allows the screen to be self-aligning to assure a perfect fit.
Recently Viewed
MCR Safety 96699XS NXG® General Purpose Gloves, XS, Polyester, Knit Wrist Cuff, Resists: Abrasion/Puncture
MCR Safety NXG® Work Gloves 13 Gauge Black Polyester Shell Black Polyurethane (PU) Palm and Fingertips NXG provides premium quality, comfort and fit making it the best choice for long work days The next generation of gloves requires the next generation in manufacturing. MCR Safety’s state-of-the-art manufacturing facility produces premium NXG® brand gloves with advanced coatings, utilizes 21st-century manufacturing efficiencies, and does so with environmentally friendly production methods. Our NXG® styles are well suited for multi-industrial applications that require high dexterity and comfort and are manufactured on seamless knit liners that are flat dipped to reproduce the natural curved shape of the hand. As a result, workers benefit from less hand fatigue and greater productivity while performing detailed tasks to heavy duty jobs. The 96699 features a seamless 13-gauge black polyester shell and black polyurethane (PU) coated palm and fingertips that will enhance gripping power. If you are looking for the best work gloves, be sure to check out MCR Safety's NXG® options! To learn more, visit our NXG® landing page here.
