Southwire Company
Alflex® 55082305 Type RWA Flexible Metal Conduit, 3/4 in Trade, 0.812 to 0.835 in ID x 1.075 in OD, 50 ft L, Aluminum
BLN B200 BLNB200 BLNB200 B-LINE B-200 SERIES STRUT MOUNTING BRACKET, CONDUIT AND CABLE, 1" HEIGHT, 1" LENGTH, 1" WIDTH, 0.406 LBS, CONDUIT SIZE: 2" EMT/RIGID, CONDUIT AND CABLE CLAMPS, 1.98 CLAMP, MADE OF 304 STAINLESS STEEL, FOR USE WITH CONDUIT; PIPE, S
EATON B-LINE CONDUIT/PIPE CLAMP, 2-PIECE, SERIES: B-2000, 1/2" CONDUIT, 16 GA TICHKNESS, CHANNEL MOUNTING, FOR USE WITH" PVC COATED RIGID CONDUIT/CLAMP, STEEL, ZINC PLATED
Carlon® E945G Non-Metallic Conduit Expansion Coupling, 1-1/4 in, For Use With Schedule 40 and 80 Conduit, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9AJ SCH 40 Plain End Standard Radius Conduit Elbow, 2 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
Carlon® UA9AL SCH 40 Plain End Standard Radius Conduit Elbow, 3 in Trade, 90 deg, PVC
Carlon® products set the standard for non-metallic indoor and outdoor boxes, conduit bodies and fittings, enclosures and more. These premium products continue to supply the industry with innovative ideas, easier upgrades and a long, service-free product life.
CCI® 02307 SJTW Extension Cord, 13 A 125 VAC, 25 ft L Cord, 3 Conductors
CCI® Tri-Source® 02837 Right Angle GFCI Cord Set With Tri-Source® Cord Connector, 120 V AC, (3) 12 AWG Bare Stranded Copper Conductor, 25 ft L
Provide personal protection from ground faults and open neutral conditions anywhere electrical equipment is used. All GFCIs are compact, weatherproof/rainproof and engineered to handle rugged conditions of any jobsite. All models feature molded connectors, 12 or 14 gauge OSHA safety yellow cords, heavy duty strain relief, reinforced blades and pins, manual "Test/Reset" buttons and industrial grade relays.
CCI® Tri-Source® 02841 In-Line GFCI Cord Set With Tri-Source® Cord Connector, 120 V AC, (3) 12 AWG Bare Stranded Copper Conductor, 2-1/2 ft L
Provide personal protection from ground faults and open neutral conditions anywhere electrical equipment is used. All GFCIs are compact, weatherproof/rainproof and engineered to handle rugged conditions of any jobsite. All models feature molded connectors, 12 or 14 gauge OSHA safety yellow cords, heavy duty strain relief, reinforced blades and pins, manual "Test/Reset" buttons and industrial grade relays.
4 in square blank flat covers are used to cover 4 in square box wiring and provide a means for access when future conduit runs are required.
4 in octagon box covers with (1) 1/2 in conduit knockouts are used to cover existing wires in octagon boxes while allowing the installation of a single 1/2 in conduit. Garvin Industries flat covers provide a quick and easy way to cover or terminate exposed electrical wire.
GARVIN® G1938 Cover, 4 in L x 4 in W, Duplex Receptacle Cover, Steel
4 in square, 1/2 in raised, duplex receptacle industrial surface covers are used to attach a duplex receptacle device directly onto 4 in square boxes in a industrial setting. Garvin Industries 4 in square industrial surface covers allow for a quick installation of duplex devices to steel covers before they are mounted to the box.
GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated
2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® SFF51 Flat Corner Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® SFF60 Flat Tee Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® SFP14 4-Hole Square Post Base, 1 Channel, 3-1/2 in H Base, For Use With 1-5/8 in Strut, Steel
Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.
GARVIN® STR150-SS 2-Piece Strut Clamp, 1-1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
GARVIN® STR50-SS 2-Piece Strut Clamp, 1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
Madison Electric 27 Tapped Beam Clamp, 2 in Conduit, 100 lb Load, Malleable Iron, Zinc Plated
Madison Electric 27 Tapped Beam Clamp, 2 in Conduit, 100 lb Load, Malleable Iron, Zinc Plated
Recently Viewed
1040T Dodge® Grid-Lign® 006752 Horizontal Split Type T10 Grid and Cover Assembly, For Use With Grid-Lign® Coupling
1040T Dodge® Grid-Lign® 006752 Horizontal Split Type T10 Grid and Cover Assembly, For Use With Grid-Lign® Coupling
RIDGID® 93580 Feed Knob, For Use With: AUTOFEED® Model K-750 Drain Cleaning Machine
RIDGID® 93580 Feed Knob, For Use With: AUTOFEED® Model K-750 Drain Cleaning Machine
SELECTA® SR7008A SR Series Midget Socket, 300 VAC, 10 A, 8 Pin
Appleton® ETP™ 8362 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, GFCI Receptacle Cover, Steel
Appleton® ETP™ 8362 Raised Electrical Box Cover, 4 in L x 4 in W x 1/2 in D, GFCI Receptacle Cover, Steel
Blackburn® 1H High Strength Split Bolt Connector, 6 to 2 AWG Conductor Solid/Stranded Copper Conductor, 11/16 x 1-11/32 in Bolt, Bronze Alloy
Blackburn® 1H High Strength Split Bolt Connector, 6 to 2 AWG Conductor Solid/Stranded Copper Conductor, 11/16 x 1-11/32 in Bolt, Bronze Alloy
Since 1904, steel City® products have set the standard as the leading brand in electrical construction. In manufacturing quality and innovative design, steel City® has no peer.
