KAF-TECH 1/2" NON-METAL L/TITE CONDUIT KAF 1/2-NM
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
-
BrandSouthwire®
-
UPC032886042737
-
Manufacturer Part Number55094201
-
CountryUSA
-
Temperature Rating-22 to 176 deg F/140 deg F Oil
-
MaterialRigid PVC
-
Trade Size1/2 in
-
ColorGray
-
TypeType NM Liquidtight
-
Inside Diameter0.622 to 0.642 in
-
Bend Radius4 in
-
Outside Diameter0.82 to 0.84 in
-
Length100 ft
- A protective combination of thermoplastic materials formed into a conduit/raceway which seals out water, liquids, abrasives, alcohol, coolants, corrosive fumes and gases, dirt, grease, mineral acids, non-concentrated fixed alkaline, petroleum oils, salt air, spray and weather
- Smooth interior for easy wire pulling
- UV sunlight-resistant jacket
- Accepts standard liquidtight fittings for use with LFNC-B
-
UNSPSC39131706
-
Standards/ApprovalsANSI/NFPA-70|CSA Certified|NEC Type LFNC-B/Article 356|REACH/RoHS 2 Compliant/UL 1660
-
Warranty1 year
-
Specification Sheet
Recently Viewed
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
Premium belts have the highest power density of any V-belt and stretch dramatically less than standard cross sections. That's why they're ideal for use on problem drives requiring high-impact strength and load-carrying power. Replaces several belts with the strength of a single belt. Banded belts feature a multiple layer tie band that provides excellent lateral rigidity to prevent belts from turning over or from coming off of the drive.
Charlotte PVC 00300 1400, 4 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
Southwire® Ultratite® 58046201 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.83 in OD, 100 ft L, PVC
This Southwire Ultratite 1/2 in. x 100 ft. Flexible Non-Metallic Conduit features a liquid-tight design ideal for protection from liquids, vapors, solids and weather. This product is ideal for installation, operation or maintenance that requires high flexibility. Made with a smooth metal interior for easy wire pulling.
Charlotte PVC 00300 1000, 2 in nominal, Hub end style, SCH 40/STD, PVC, Domestic
PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and
