Results 121 - 144 of 162
Grid

Innovation It's what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting edge of electrical products ever since. Our newest support innovation for the 21st century is the UL Listed clip-it. All of our hangers and supports are made of high quality materials and produced to exacting standards. From Madison straps to clip-it and everything in between, Madison has the hangers and supports you need to get the job done right.

Innovation It's what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting edge of electrical products ever since. Our newest support innovation for the 21st century is the UL Listed clip-it. All of our hangers and supports are made of high quality materials and produced to exacting standards. From Madison straps to clip-it and everything in between, Madison has the hangers and supports you need to get the job done right.

Snap-On EMT Strap, 1-1/4 in Conduit, Steel

Snap-On EMT/Rigid Strap, 3 in Conduit, Steel

ROMEX CABLE STAPLES--BX/500

Innovation It's what Madison is all about. Check out our Madison Strap, the product that started it all. Invented in 1929 by our founder Earl Adkinson, Madison has been on the cutting edge of electrical products ever since. Our newest support innovation for the 21st century is the UL Listed clip-it. All of our hangers and supports are made of high quality materials and produced to exacting standards. From Madison straps to clip-it and everything in between, Madison has the hangers and supports you need to get the job done right.

Heavy Duty Snap-On Rigid Strap, 1-1/2 in Conduit, Steel

LBM-100 Type LB Rigid Conduit Body, 1 in Hub, Malleable Iron

MIBB Intersystem Bonding Bridge, Aluminum, Tin Plated

EATON B-LINE CONDUIT/PIPE CLAMP, 2-PIECE, SERIES: B-2000, 1/2" CONDUIT, 16 GA TICHKNESS, CHANNEL MOUNTING, FOR USE WITH" PVC COATED RIGID CONDUIT/CLAMP, STEEL, ZINC PLATED

Smoothly dispense coil of armored cable or NM-B cable. Three item in one, our dispenser come with both floor and stud mounting bracket and has the capacity to support 1000 ft reel. Its swivel eyelet prevent tangle while paying out cable. A wide base keep the load stable.

Trouble lights feature durability and practicality. Constructed from tough PVC with power switch, metal guard and grounded outlets. The choices in SJEO cord are oil and chemical resistant and stay flexible under temperature extremes to -67ËšF.

Compact at only an 1-3/4” max depth and extremely lightweight, the ProLight™ Slim Line LED Floodlight Series are extremely durable. The units are IP65 rated and suitable for use in all weather conditions. Cool operation enables the Slim Line Series to be used in confined spaces, making it ideal for the Construction, Industrial/MRO, Utilities, Transportation and Environmental channels.

Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull ® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull® Type NM-B cable is manufactured as 2, 3, or 4 conductor cable, with a bare ground wire. Copper conductors are annealed (soft) copper. Stranded conductors are compressed stranded. Conductor insulation is 90 degC-rated polyvinyl chloride (PVC), nylon jacketed. Southwire® Romex® Brand SIMpull® Type NM-B is designed for Easier Pulling, Resulting in Easier installation. The cable jacket is color-coded for quick size identification; White - 14 AWG, Yellow - 12 AWG, Orange - 10 AWG,and Black - 8 AWG and 6 AWG.

Southwire Type SOOW Flexible Cords are permitted for use as specified by Article 400 and related articles of the National Electrical Code. Southwire Type SOOW Flexible Cords are designed for extra hard usage on industrial equipment, heavy tools, battery chargers, portable lights welding leads, marine dockside power, power extensions and mining applications. RoHS compliant, UL listed and CSA certified for indoor and outdoor use.

Southwire type SEOOW flexible cords are manufactured using bare flexible stranded class K copper conductors per ASTM B-174, heat, moisture and oil-resistant 105degC color coded TPE insulation. The insulated conductors are cabled with non-wicking polypropylene fillers, with a tissue-paper separator wrapped around the assembly to promote easier removal of the jacket. A heat, moisture and oil-resistant flexible TPE jacket is extruded over the assembly to complete the construction. Some sizes may be subject to minimum order quantity.

Southwire® Seoprene® 55046403 Type SEOOW Flexible Cord, 600 VAC, (4) 16 AWG Bare Stranded Copper Conductor, 250 ft L

Page 6 of 7

Recently Viewed

3/32" E-CLIP RETAINING RING-ANR15009 >

My Wishlist
Compare

123-562 NATIONAL HARDWARE PRODUCTS

Screw Eyes
$2.13

3/8" X 8" ZINC-PLATED EYEBOLT-NTL123562 >

10-32" X 1-1/4" USS Stainless Steel Phillips Flat Head Machine Screw

Proto® J1207EFS Open End Stubby Length Combination Wrench, 7/32 in, 6 Points, 15 deg Offset, 3-3/32 in OAL, Alloy Steel, Satin

Reaches into deep recesses and fits over extra-long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size

1-1/8" -ID SPHERICAL OD INSERT BEARING-MBUVS218 >

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu