Crosby Group
CROSBY 1-02025 404 Light Champion Tail Board Snatch Block, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Model Number: Type 404 Tailboard Block Working Load Limit: 4 Tons (8,000 lbs / 8,800 lbs depending on system configuration) Sheave Diameter: 4-1/2 inches Wire Rope Size Compatibility: 3/8" to 1/2"Bearing Type: Self-lubricating bronze bushing Product Weight: 7 lbs
CROSBY 666247 HS-262B Standard Steel Block With Loose Side Latch Hook, Manila Rope Cable, 5/8 in, 1800 lb Load, 3 in OD
HS-262B Standard Steel Block With Loose Side Latch Hook, Manila Rope Cable, 5/8 in, 1800 lb Load, 3 in OD
CROSBY 01-08127 Light Champion 418 Double Sheave Snatch Block With Hook, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 6 in OD
This 6" sheave Crosby® McKissick snatch block has a forged alloy heat treated hook and works with 5/8"-3/4" wire rope. Hook assemblies on 4-1/2"-14" sizes can be interchanged. The 418 type snatch block is furnished with bronze bushings and meets or exceeds all requirements of ASME B30.26.
CROSBY 01-09064 419 Light Champion Snatch Block With Shackle, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Working Load Limit (WLL): 4 Tons (8,800 lbs) with a 4:1 design safety factor. Sheave Diameter: 4-1/2 inches (Single sheave). Wire Rope Compatibility: Designed for wire rope diameters ranging from 3/8" to 1/2". Bearing Type: Self-lubricating bronze bushing with integrated pressure lubrication fittings for easy maintenance. Material & Finish: Painted alloy steel construction featuring a forged steel swivel shackle. Total Product Weight: 12 lbs.
CROSBY 01-09359 419 Light Champion Snatch Block With Shackle, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 10 in OD
Working Load Limit: 8 metric tons (17,600 lbs). Sheave Diameter: 10 inches with a single sheave count. Wire Rope Capacity: Designed for 5/8" to 3/4" wire rope diameters. Safety Design Factor: Built with a 4:1 safety factor. Product Weight: Approximately 42 to 43 lbs. Bearing Type: Heavy-duty roller bearings.
CROSBY 07-10225 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 10 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 10 in OD
CROSBY 07-10243 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
CROSBY 1-21022 431 Super Champion Snatch Block With Shackle, 1 to 1-1/8 in, 20 ton Load, 8 in OD
431 Super Champion Snatch Block With Shackle, 1 to 1-1/8 in, 20 ton Load, 8 in OD
CROSBY 10-35045 Terminatorâ„¢ Wedge Socket With Wedge Nad Pin, 1 in, Steel, Painted, For Use With All Wire Rope
Wire Rope Size: 1 inch (25.4 mm). Model Series: S-421T Terminatorâ„¢ .Pin Diameter: 2.00 inches. Component Weight: Approximately 30.75 to 35.5 lbs. Material & Finish: Cast steel construction, typically painted or galvanized.
CROSBY 170629 HF-2 Hay Fork Pulley Block With Swivel Eye, Manila Rope Cable, 1-1/4 in, 1 ton Load, 4-1/2 in OD
HF-2 Hay Fork Pulley Block With Swivel Eye, Manila Rope Cable, 1-1/4 in, 1 ton Load, 4-1/2 in OD
CROSBY 665444 HW-261B Standard Steel Block With Swivel Hook, Wire Rope Cable, 3/8 in, 1200 lb Load, 3/8 in ID x 3/4 in OD
Western® 665444 HW-261B Standard Steel Block With Swivel Hook, Wire Rope Cable, 3/8 in, 1200 lb Load, 3/8 in ID x 3/4 in OD
905462 Common Bore Sheave, 3/8 in, 3/4 in ID x 1-7/8 in OD
Nominal Outside Diameter: 6 inches (152 mm) Wire Rope / Wireline Diameter: 3/8 inch (10 mm) Bore Size (Shaft Diameter): 3/4 inch (19.1 mm) Hub Width: 1-1/16 inches (27 mm) Material: Powdered Metal (P.M.) Weight: 1.13 lbs (0.51 kg)
Dimensions: 6" Outside Diameter (OD) x 3/4" Hub Width x 3/4" Bore Size (6 × 3/4 × 3/4). Wire Rope Size Compatibility: 3/8" wireline / wire rope. Bushing Material: Equipped with S.A.E. 660 Bronze Bushings featuring a "Figure 8" oil groove to optimize shaft lubrication. Weight: Approximately 2.5 lbs.
CROSBY A-1 L-150 Standard Lever Load Binder, 9200 lb Load, 3/8 in, 1/2 in, 4-1/2 in
In industrial rigging and cargo control, the Crosby® A-1 Lebus® L-150 Standard Load Binder is a highly recognized tool. Function: A traditional lever-type tensioning device used to tighten transport chains over flatbed cargo. Compatibility: Typically rated for 3/8-inch to 1/2-inch transport chains. Manufacturer: Produced under the Lebus brand by Kito Crosby.
CROSBY C-1 L-150 Standard Lever Load Binder With Hook, 13000 lb Load, 1/2 in, 5/8 in, 4-3/4 in
If you are securing transport chain for flatbed trucking or heavy hauling, this refers to the Crosby Lebus L-150 Standard Lever Type Load Binder (often cataloged or stamped with a "C-1" designation).Chain Compatibility: Designed for 1/2-inch to 5/8-inch transport chains. Capacity: Features a Working Load Limit (WLL) of 13,000 lbs. Build: Forged steel construction with a quenched and tempered handle that toggles away from the load for easy release.
CROSBY CR-071 L-150 Standard Lever Load Binder, 10800 lb Load, 5/16 in, 3/8 in, 4-1/2 in
L-150 Standard Lever Load Binder, 10800 lb Load, 5/16 in, 3/8 in, 4-1/2 in
CROSBY L-140-R-7 L-140 Standard Ratchet Load Binder, 4 ton Load, 8 mm, 10 mm Chain/Rope, 203 mm Take Up, Ratchet Handle, G70, G80, G100
Lebus® 1048404 L-140 Standard Ratchet Load Binder, 4 ton Load, 8 mm, 10 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
Standard Ratchet Load Binder, 7.26 Ton Load, 13 mm, 16 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
CROSBY L-140-R-C L-140-RA Standard Ratchet Load Binder, 6.8 ton Load, 10 mm, 13 mm Chain/Rope, 203 mm Take Up, Ratchet Handle, G70, G80, G100
L-140 Standard Ratchet Load Binder, 6.8 ton Load, 10 mm, 13 mm Chain/Rope, 203 mm Take Up, 1-Piece/Forged Handle, G70, G80, G100
CROSBY L-150-712, L-150 Snubbing Load Binder, 5400 lb Load, 5/16 in, 3/8 in, 4-1/4 in
L-150 Snubbing Load Binder, 5400 lb Load, 5/16 in, 3/8 in, 4-1/4 in
L-130 Midget Load Binder, 1450 lb Load, 3/16 to 1/4 in, 2.4 in
Crosby® 1 043294, G-291-15/16 X 4 1/4, Eye Bolt With Regular Nut, 5/16 in, 4-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Crosby® 1043294 G-291 Eye Bolt With Regular Nut, 5/16 in, 4-1/4 in L Shank, Forged Steel, Hot Dipped Galvanized
Recently Viewed
BBI 848058 Finished Hex Nut, 1/2-13, Medium Carbon Steel, Zinc CR+3, 5 SAE J995 Material Grade, Right Thread
BBI 848058 Finished Hex Nut, 1/2-13, Medium Carbon Steel, Zinc CR+3, 5 SAE J995 Material Grade, Right Thread
FHP V-BELTS-PIX4L415>
Estwing® rip claw solid steel hammer provide unsurpassed balance and temper. The head and handle are fully polished and forged in 1-piece. Our exclusive Shock Reduction Grip® is molded on and offers the utmost in both comfort and durability, while reducing vibrations caused by impact.
48-T SPROCKET FOR #100 CHAIN-BRW100R48>
1-GAL GL-5, 80-W-90-W GEAR OIL
MCR Safety NXG® Work Gloves 13 Gauge Gray Nylon Shell Gray PU Coated Palm and Fingertips NXG provides Premium quality, comfort and fit making it the best choice for long work days The next generation of gloves requires the next generation in manufacturing. MCR Safety’s state-of-the-art manufacturing facility produces premium NXG® brand gloves with advanced coatings, utilizes 21st-century manufacturing efficiencies, and does so with environmentally friendly production methods. Our NXG® styles are well suited for Multi-Industrial applications that require high dexterity and comfort and are manufactured on seamless knit liners that are flat dipped to reproduce the natural curved shape of the hand. As a result, workers benefit from less hand fatigue and greater productivity while performing detailed tasks to heavy duty jobs. The 9696 can be used as a touchscreen gloves. They feature a seamless gray 13 gauge nylon shell and a gray polyurethane (PU) dipped palm and fingertips that will enhance gripping power. If you are looking for the best work gloves, be sure to check out MCR Safety's NXG® options! To learn more, visit our NXG® landing page here.
