CROSBY 01-08127 Light Champion 418 Double Sheave Snatch Block With Hook, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 6 in OD
This 6" sheave Crosby® McKissick snatch block has a forged alloy heat treated hook and works with 5/8"-3/4" wire rope. Hook assemblies on 4-1/2"-14" sizes can be interchanged. The 418 type snatch block is furnished with bronze bushings and meets or exceeds all requirements of ASME B30.26.
-
BrandMcKissick®
-
UPC662547056478
-
Manufacturer Part Number108127
-
CountryUSA
-
Load Capacity8 ton
-
Cable TypeWire Rope
-
Maximum Cable Size5/8 to 3/4 in
-
TypeDouble Sheave
-
SeriesLight Champion 418
-
Sheave Outside Diameter6 in
-
BearingsSelf-Lubricating Bronze Bushing
- Forged alloy heat treated hook
- Forged steel swivel tees, yokes and shackles
- Hook and shackle assemblies on 4-1/2 in through 14 in sizes can be interchanged
- Opening feature permits insertion of rope while block is suspended from gin-pole
- 3 - 18 in 418 blocks have exclusive bolt-retaining spring to assure no lost bolt
- Can be furnished with S-4320 hook latch
- Pressure lube fittings
- 3 - 10 in feature dual rated wire line sheaves
- 4-1/2 in and larger are RFID equipped
- Fatigue rated
- BB bearing code
-
UNSPSC24101613
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
CROSBY 01-08127 Light Champion 418 Double Sheave Snatch Block With Hook, Wire Rope Cable, 5/8 to 3/4 in, 8 ton Load, 6 in OD
This 6" sheave Crosby® McKissick snatch block has a forged alloy heat treated hook and works with 5/8"-3/4" wire rope. Hook assemblies on 4-1/2"-14" sizes can be interchanged. The 418 type snatch block is furnished with bronze bushings and meets or exceeds all requirements of ASME B30.26.
Browning® 767910 VTWE Non-Expansion Normal Duty Take-Up Ball Bearing Unit With Seal Flinger, 1-15/16 in Dia Bore, 5-29/32 in L x 2-1/8 in W x 4-1/2 in H, 7889 lb Dynamic/5216 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
UNIVERSAL JOINTS-U-JOINTS-CHIUJ433>
S-290 SUPER GLUE--CARDED-JWH354388 >
Pipe Hanger, Pipe Size: 2", Rod Size: 3/8-16
JASON 400H200 SYNCHRONOUS BELT, 1/2 " PITCH; 40" PITCH LENGTH ;1" BELT WIDTH .80 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS400H200 >
