CROSBY 0916227 6" X 3/4" WIRE ROPE SHEAVES
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
-
BrandMcKissick®
-
Manufacturer Part Number2026938
-
CountryUSA
-
Maximum Cable Size5/8 in
-
Sheave MaterialForged Steel
-
Sheave Outside Diameter6 in
-
BearingsSelf-Lubricating Bronze Bushing
- McKissick® Bronze bushed sheaves are equipped with SAE 660 bronze bushings for cold finished shafts
-
UNSPSC31171804
-
Catalog
Recently Viewed
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
MORSE® 15477 1439 Drill Blank, #56 Drill Blank, 1-3/4 in L, HSS
4" X 1-1/2" 250# RIGID CASTERS-PJCMH415RS64R >
FB-4016 X 3/4 Dodge® 099103 Finished Bore Chain Coupling Flange, 40 Chain, 3/4 in Dia Bore, 16 Teeth, 3.03 in OD, 1.97 in Dia Hub, Steel
Dodge® Chain Couplings offer a simple, widely accepted and inexpensive way to couple two shafts. They are interchangeable with industry standard dimensions. Dodge® Chain Couplings can be provided with Taper-Lock bushed hubs, finished bore or reboreable flanges. Chain coupling covers and chain assemblies are also available from stock.
#504 3" BOX ED STEEL HINGES-NTL139808 >
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
