CROSBY 1-02025 404 Light Champion Tail Board Snatch Block, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Model Number: Type 404 Tailboard Block Working Load Limit: 4 Tons (8,000 lbs / 8,800 lbs depending on system configuration) Sheave Diameter: 4-1/2 inches Wire Rope Size Compatibility: 3/8" to 1/2"Bearing Type: Self-lubricating bronze bushing Product Weight: 7 lbs
-
BrandMcKissick®
-
Manufacturer Part Number102025
-
CountryUSA
-
Load Capacity4 ton
-
Cable TypeWire Rope
-
Maximum Cable Size3/8 to 1/2 in
-
TypeTail Board
-
Series404 Light Champion
-
Sheave Outside Diameter4-1/2 in
-
BearingsBronze Bushing
- Opening feature permits insertion of rope while block is suspended from gin-pole
- 3 in thru 18 in 418 and 419 blocks have exclusive bolt-retaining spring to assure no lost bolts
- Can be furnished with S-4320 hook latch
- Pressure lube fittings
- 3 to 10 in feature dual rated wireline sheaves
-
UNSPSC24101613
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
CROSBY 1-02025 404 Light Champion Tail Board Snatch Block, Wire Rope Cable, 3/8 to 1/2 in, 4 ton Load, 4-1/2 in OD
Model Number: Type 404 Tailboard Block Working Load Limit: 4 Tons (8,000 lbs / 8,800 lbs depending on system configuration) Sheave Diameter: 4-1/2 inches Wire Rope Size Compatibility: 3/8" to 1/2"Bearing Type: Self-lubricating bronze bushing Product Weight: 7 lbs
MORSE® 25732 1766 Straight Shank Cap Screw Counterbore, 1/2 in Screw, 0.787 in Dia Bore, 6-1/2 in OAL
#2000 1" ZINC HOOK AND EYE-NTL117812 >
MORSE® 34208 2082 Straight Flute Pulley Tap, Plug Chamfer, 5/16-18 Thread, H3 Thread Limit
Leviton® 80747-W Standard Size Combination Wall Plate, 3 Gangs, 6.38 in W x 4.5 in H, Thermoplastic, White
Leviton® 80747-W Standard Size Combination Wall Plate, 3 Gangs, 6.38 in W x 4.5 in H, Thermoplastic, White
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
