CROSBY 07-10243 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
-
BrandWestern®
-
Manufacturer Part Number710243
-
CountryUSA
-
Load Capacity1000 lb
-
Cable TypeManila Rope
-
Maximum Cable Size1 in
-
SeriesT-350-R
-
Sheave Outside Diameter12 in
-
Dimensions12 in
-
BearingsRoller
- Furnished with drop forged swivel latch hooks
-
UNSPSC24101613
-
Catalog
Recently Viewed
CROSBY 07-10243 T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
T-350-R Gin Block With Swivel Latch Hook, Manila Rope Cable, 1 in, 1000 lb Load, 12 in OD
Also called pipe taps, carbon steel NPT pipe taps are designed to clean and or re-thread damaged or jammed pipe threads. They are appropriate for threading a wide variety of materials both ferrous and nonferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer NPT threads require the use of a sealer like teflon tape or pipe compound.
7" GALVANIZED ROOF FLASHING-JWH410987>
Milwaukee® M18™ M12™ 48-59-1808 Rapid Charger, For Use With M12™ and M18™ Battery, Li-Ion Battery, 1 Battery
The M18™ & M12™ rapid charger charges packs up to 40% faster, reducing downtime and maximizing productivity. The charger accepts all M18™ and M12™ batteries, providing an upgrade for both systems. Featuring REDLINK™ Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimize the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.
3/16" SOLID SHAFT COLLAR-AMCASC18 >
Makita® 195236-5 Type 1 Single Notch Dust Collection Cover, For Use With Makita® 9564CV/PCV, 9565CV/PCV, GA5020/C/Y, GA4542C01, GA4543C01, GA5042C01, GA5043C01 Angle Grinders
The Makita® dust extracting surface grinding shroud (195236-5) is designed to fit Makita® 4-1/2 to 5 in grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface. The outside diameter of the extraction port will work with most standard vacuum hose systems. The dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal.
