BALL BEARINGS
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL2209 >
TPR-ID SELF-ALIGN BALL BEARING-NTN2209K >
STR-ID SELF ALIGN BALL BEARINGS-SNR2210>
STRAIGHT-ID SELF-ALIGN BALL BEARING-NTN2210 >
STR-ID SELF ALIGN BALL BEARING-NTN2212>
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL2212 >
TPR-ID SELF-ALIGN BALL BEARING-NTN2216K >
TPR-ID SELF-ALIGN BALL BEARING-GUL2216K >
TPR-ID SELF-ALIGN BALL BEARINGS
TPR-ID SELF-ALIGN BALL BEARING-GUL2217K >
SPLIT BEARING-FAG222SM90>
DOUBLE OPEN FACE BALL BEARINGS-FAF222W>
PHENOLIC CAGE SPHERICAL BEARINGS
DOUBLE SHIELDED BALL BEARINGS-GEN2220777>
DOUBLE SEALED BALL BEARINGS-GEN2220788>
TAPER-BORE SPHERICAL BEARINGS-NSK22207K>
DOUBLE SEALED BALL BEARINGS-GEN2220888>
DOUBLE SHIELDED BALL BEARINGS-GEN2220977>
DOUBLE SEALED BALL BEARINGS-GEN2220988>
BALL BEARINGS-GEN2221000>
DOUBLE SHIELDED BALL BEARINGS-GEN2221077>
DOUBLE SEALED BALL BEARINGS-GEN2221088>
DOUBLE SHIELDED BALL BEARINGS-GEN2261077>
DOUBLE SEALED BALL BEARINGS-GEN2261088>
Recently Viewed
RotaLoc Plus™ Annular Cutters are designed for the Hougen® HMD130 low profile drill. They're made of M42 HSS, feature stack cut geometry for penetrating multiple plates in a single pass and are designed for a full 1 in depth of cut. They feature a 5/8 in bayonet style shank mounting for fast change out, with no tools required to install in the drill spindle and can be as easily removed. For optimum cutter tool life and cutter efficiency use Hougen® Slick-Stik™ lubricant or RotaGel™ cutting lube.
ISOSTATIC™ Oilube® 402048 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 3/4 in W, 7/8 in Dia Flange
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
MORSE® 58952 5967 Center Cutting High Performance Regular Length Single End End Mill, 1 in Dia Cutter, 0.06 in Corner Radius, 1-1/2 in Length of Cut, 2 Flutes, 1 in Dia Shank, 4 in OAL, Bright
Shaft Size: 1.250" (1-1/4 inches) Rotary Head Type: Type C (Elastomer bellows with a single coil tapered spring) Stationary Seat Type: Type 1 (Cup-mounted mating ring) Stationary Bore Cup Diameter: 1.765"Operating Temperature Range: -40°F to 225°F (-40°C to 107°C) Maximum Operating Pressure: 150 PSI (10.3 Bar)
COLD WATER CARTRIDGE - SPKRPG050533>
