ISOSTATIC™ Oilube® 402048 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 3/4 in W, 7/8 in Dia Flange
ISOSTATIC™ Oilube® 402048 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 3/4 in W, 7/8 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802049188
-
Manufacturer Part Number402048
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter7/8 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter5/8 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSF-1620-12
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 402048 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 3/4 in W, 7/8 in Dia Flange
ISOSTATIC™ Oilube® 402048 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 3/4 in W, 7/8 in Dia Flange
SUPERIOR STRENGTH NYLON BRAIDED ROPE. ROT-RESISTANT, ABRASION-RESISTANT, AND LONG LIFE. SOLID BRAID DESIGN DELIVERS HIGH ABRASION RESISTANCE AND STRENGTH, WITH RELATIVELY LOW STRETCH. IDEAL FOR A WIDE VARIETY OF INDOOR AND OUTDOOR APPLICATIONS WHERE HIGH TENSILE STRENGTH AND DURABILITY ARE IMPORTANT.
- JWH707066>
Milwaukee® 2807-22 M18™ FUEL™ Hole Hawg™ Cordless Right Angle Drill Kit, 1/2 in Keyed Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery
Milwaukee®, WI - Milwaukee® tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18™ FUEL™ Hole Hawg™ with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ brushless motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™® is the fastest in applications when drilling 7/8 in ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7 lb. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™ is able to drill up to 220 7/8 in holes with a ship auger on a single charge.
Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
1/4" MEXICAN SISAL ROPE--50' PER ROLL-JWH739954 >
Dichtomatik 75122141 O-Ring, 17 mm ID x 22 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
