BALL BEARINGS
205-PP-B-7 15/16" -ID Spherical OD Ag Ball Bearings
15/16" -ID SPHERICAL OD AG BALL BEARING-GUL205PPB7 >
205-SF Single Shielded Radial Ball Bearing
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
205-SFF Double Shielded Ball Bearing
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
205-VVH 5/8"-ID JD AA-205-DD AG BEARINGS
AG BEARING AKA JOHN DEER AA205DD-GUL205VVH >
206-K-DD-G Double Shielded Ball Bearing
DOUBLE SHIELDED BALL BEARING WSR-FAF206KDDG>
206-M Double Open Faced Ball Bearing
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
207 Double Open Max Load Ball Bearing
DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>
208-CFF MRC BALL BEARINGS
The MRC 208CFF is a single-row deep groove type ball bearing featuring two metal shields. Manufactured under the MRC brand (by SKF), this specific configuration is equivalent to a standard 6208-2Z or 6208ZZ bearing. Key Specifications Bore Diameter (Inner): 40 mm Outside Diameter: 80 mm Width: 18 mm Closure Type: Double Shielded (indicated by the FF suffix).
208-S-ZZ-C Wide Single Row Bearing
Cylindrical Bore Deep Groove Ball Bearing
Item #100760654
Deep Groove Bearing
1.57 in Inner Diameter
3.15 in Outer Diameter
1.19 in Width
Bearing Steel Material
208-SFF Wide Single Row Bearing
The MRC 208SFF is a heavy-duty, single-row deep groove radial ball bearing manufactured by MRC (a brand under SKF). It features a straight bore and a double-shielded closure ("FF" suffix), making it highly effective at retaining grease while keeping out dust and contaminants. Key Technical Specifications Bore Diameter (Inner ID): 40 mm Outside Diameter (OD): 80 mm Width: 18 mm Enclosure Type: Double Shielded (Metal shields on both sides) Dynamic Load Capacity: 6,900 lb. Static Load Capacity: 4,270 lb. Maximum Speed: 10,000 RPMInterchange Equivalents: Cross-references directly with standard industry part number 6208-2Z (or 6208-ZZ).
Recently Viewed
GP® 2020MD Deep Length Socket, 1/2 in, 20 mm Hex Socket, 6 Points
Gates® Power Transmission Hi-Power® II B146 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 149 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Super HC® Molded Notch PowerBand® 12/3VX600 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 60 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
6-MALE JICX3/8" -MALE PIPE THREAD 90 DEGREE HYDRAULIC ADAPTER-DAY250166 >
Gates® Power Transmission PowerGrip® HTD® 520-5M-15 Synchronous Belt, 15 mm W, 520 mm OAL, 5 mm Pitch, 104 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Browning® 1077288 QD Bushing, 1-1/2 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
