BALL BEARINGS
3215 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3215>
32212-01 1/2"-ID Flanged Ball Bearing
1/2"-ID FLANGED BALL BEARING - GEN3221201>
33-KDD-5 Miniature Series Radial Ball Bearing
MINIATURE SERIES RADIAL BALL BEARING - FAF33KDD5>
33-PP-5 Double Sealed Mini Ball Bearing
DOUBLE SEALED MINI BALL BEARING - FAF33PP5>
33006-01 Af-3236 Bearing .50" X 1.75" X .562"
AF-3236 BEARING .50" X 1.75" X .562" - GEN3300601>
3303-A Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3303A>
3306 Double Open Face Ball Bearing
The New Departure 3306 is a double-row, angular contact ball bearing, or a single-row deep groove ball bearing, often referenced in legacy automotive and industrial catalogs. The standard dimensions for this bearing are a 30 mm bore (inner) diameter, 72 mm outer diameter, and a 30.2 mm width
3306-ATN-9 Double Row Bearing
Bore Diameter (d): 30 mm Outside Diameter (D): 72 mm Overall Width (B): 30.2 mm Contact Angle: 30° to 32°Enclosure Type: Open (no integrated rubber seals or shields) Dynamic Radial Load Capacity (C): 41.5 kN Static Radial Load Capacity (C₀): 27.5 kN Limiting Speed: Up to 9,000 RPM Total Weight: Approximately 0.53 kg (1.18 lbs)
3308-DNRCBM Double Row Bearing
Bore (Inner) Diameter: 40 mm Outside Diameter: 90 mm Overall Width: 36.5 mm Contact Angle: 40°Limiting Speed: 7,000 RPM Basic Dynamic Load Rating: 49.4 kN Basic Static Load Rating: 41.5 kN
3310 Single Row Open Face Bearing
Bore Diameter: 50 mm Outside Diameter: 110 mm Width: 44 mm (or 27 mm depending on the specific single-row variation)
3310-A Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3310A>
Recently Viewed
1-1/4X3-1/2BN 1-1/4" -male Pipe Thread x 3-1/2" Black Nipple
1-1/4" -MALE PIPE THREADX3-1/2" BLACK NIPPLE
MORSE® 59045 5939 Pilot Die Trimmer Carbide Burr, 1/8 in Dia Head, 1 in L of Cut, 2-1/2 in OAL, Double Cut
The United Abrasives/SAIT C24N Concrete wheel is excellent for grinding masonry, concrete, stone and aggregate. The C24N wheel can be used on hard to grind metal like cast iron and carbide. This wheel features a soft bond for fast stock removal. Proudly manufactured in the USA.
#50 RIVETED ROLLER CHAIN (FT)-ROL50RIV >
#10 X 5/8" Pan Head Phillips Tek Screws
V-BELTOUTSIDE CIRCUMFERENCE >101"-JASC97 >
