G-209-1-3/8 CROSBY MATERIAL HANDLING GROUP
1-3/8" 13.5-TON SHACKLES >1018598-CROG20913/8 >
Recently Viewed
1-3/8" 13.5-TON SHACKLES >1018598-CROG20913/8 >
Morse® Matrix II ZWEFC1014MAT-120" Welded Band Saw Blade, 120 in L, 3/4 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® Matrix II ZWEFC1014MAT-120" Welded Band Saw Blade, 120 in L, 3/4 in W x 0.035 in THK, 10/14 TPI, Bi-Metal Blade, HSS Tooth
Morse® 177689 MHS Advanced Hole Saw, 4-1/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse. Arbor required.
Hougen® Rotabroach® 12136 12000 Annular Cutter, 1-1/8 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Weiler® 14126 Cup Brush, 4 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.02 in Dia Filament/Wire, Crimped, Stainless Steel Fill
Weiler® 14126 Cup Brush, 4 in Dia Brush, 5/8-11 UNC Arbor Hole, 0.02 in Dia Filament/Wire, Crimped, Stainless Steel Fill
REED offers a variety of pipe cutters, both with and without guides. Standard pipe cutters without guides feature strong malleable iron frames. These pipe cutters work on steel, stainless steel, galvanized steel or cast iron pipe, depending on the installed cutter wheels. (Models ship with cutter wheels for steel.) The wide rollers help create square cuts. REED's thin profile, sharp cutter wheels allow shorter handles for work in smaller spaces. These pipe cutters leave no burr, which is great for threading jobs. The 2-3 pipe cutter with three wheels (and no rollers) means more cutting surface and less handle swing.

