SENCO® 4Z0101N FramePro®325XP Paper Taped Pneumatic Smooth Shank Framing Nailer, 2 to 3-1/4 in Fastener, Angled Strip Collation, 83 Magazine, 70 to 120 psi
This well-balanced light weight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth-shank 30 to 34 deg paper taped strip nails. SENCO® XP tools are specifically engineered for demanding pros and demanding environments.
-
BrandSENCO®
-
UPC741474095566
-
Manufacturer Part Number4Z0101N
-
CountryUSA
-
Fastener Size2 to 3-1/4 in
-
Magazine Capacity83
-
Tool/KitBare Tool
-
Trigger TypeSelectable Actuation
-
Collation Angle34 deg
-
Collation TypeAngled Strip
-
TypePaper Taped Pneumatic Smooth Shank
-
Handle TypeComfort Grip/Ergonomic
-
Air Flow Rate5.2 scfm
-
Air Inlet3/8 in NPT
-
Air Pressure70 to 120 psi
-
SeriesFramePro®325XP
-
Housing MaterialAluminum
-
Dimensions17-5/16 in L x 4-5/16 in W x 11-7/8 in H
- TrueDrive magazine - reduces jams and mis-feeds
- Highly efficient internal design, means less wear and tear on the compressor
- Aggressive toenail safety
- Fits easily between studs and joists
| Cross-Reference Number |
|---|
| 301599 |
-
UNSPSC27112711
-
Warranty5 Years
-
Instruction/Installation Manual
Recently Viewed
SENCO® 4Z0101N FramePro®325XP Paper Taped Pneumatic Smooth Shank Framing Nailer, 2 to 3-1/4 in Fastener, Angled Strip Collation, 83 Magazine, 70 to 120 psi
This well-balanced light weight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw and smooth-shank 30 to 34 deg paper taped strip nails. SENCO® XP tools are specifically engineered for demanding pros and demanding environments.
1-15/16" -ID SPHERICAL INSERT BEARING-FAFGN115KRRB >
GRINDING WHEELS-CRB27536>
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489114 Fully Threaded Carriage Bolt, 1/2-13, 2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
Milwaukee® 23-66-0020 Switch, For Use With 6175 14 in Cut-Off Machine
