Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
-
BrandBostitch®
-
UPC077914041214
-
Manufacturer Part NumberF28WW
-
CountryUSA
-
Fastener Size2 to 3-1/2 in
-
Magazine Capacity100 Nails
-
Magazine LoadingBottom Load
-
Tip TypeNon-Marring
-
Tool/KitBare Tool
-
Trigger TypeSequential Actuation
-
Collation Angle28 deg
-
Collation TypeWire
-
TypeAngled Offset Round
-
Handle TypePistol Grip
-
Air Flow Rate0.075 cfm
-
Air Inlet1/4 in Male
-
Air Pressure120 psi
-
Housing MaterialMagnesium
-
Shank Size0.113 to 0.131 in
-
Dimensions20 in L x 5-1/8 in W x 14-1/4 in H
-
Exhaust LocationAdjustable
- This 28 deg wire weld framing nailer is designed to drive nails into engineered lumber
- It is lightweight for easy management and you can control the depth of the nail with a push button
- Depend on this 28 deg wire weld framing nailer for efficiency
- Patented push button adjustable depth guide sets nail to desired depths quickly and conveniently
- Notched 16 in layout indicator on magazine helps achieve correct distance between studs in a matter of seconds
- Lightweight magnesium design for durability
- Adjustable rafter hook allows users to hang tool on rafters and joists
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 2UV87 |
| 395226 |
-
UNSPSC27131506
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified
-
Warranty7 Years Limited
Recently Viewed
Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
Bostitch® F28WW Angled Offset Round Framing Nailer, 2 to 3-1/2 in Fastener, Wire Collation, 100 Nails Magazine, 120 ps
Black Stallion® JF1010-OR-LRG Jacket, L, Cotton, Orange, Resists: Flame, ASTM F1506
The Black Stallion JF1010-OR is our 9 Oz Flame Resistant Safety Welding Jacket with FR Triple Trim Reflective Tape. 30 inches in length, the safety orange welding jacket is loaded with safety extras. 2” flame-resistant triple trim tape with 3/4” reflective silver helps keep the wearer visible, even in low light or visibility. The standup welder's collar helps protect the neck from sparks and splatter while welding, while the left sleeve scribe pocket holds welding markers & pens. A convenient inside pocket holds small items and devices and 6 powder-coated steel front snaps and wrist snaps help keep the fit snug and adjustable. Overall, the JF1010 is ideal for light welding applications where being "seen" is critical (construction, traffic zones, etc.).
Suitable for use with oxygen-acetylene only - 1/4 in (6.35mm) x 50 ft (15.24m) - Red hose for acetylene - Green hose for oxygen - Use with acetylene fuel gas only - Resists kinks, heat, weather and solvents
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
36" MOLDED WAND PLATED EXTENSION - VALPK85202026>
1-1/2" X 3/4" BLACK 90-DEGRE ELBOW-JPW11/2X3/4BE >
