SENCO® 4G0001N Oil Free Pneumatic Finish Nailer Kit, 15 ga x 1-1/4 to 2-1/2 in L Fastener, Angled Strip Collation, 104 Magazine, 70 to 120 psi
The FinishPro® 42XP has established itself as the marquee tool for professional finish carpenters. The FinishPro® 42XP has great durability and superior performance.
-
BrandSENCO®
-
UPC741474602801
-
Manufacturer Part Number4G0001N
-
CountryUSA
-
Fastener Size15 ga x 1-1/4 to 2-1/2 in L
-
Magazine Capacity104
-
Magazine LoadingBottom Load
-
Tip TypeNon-Marring
-
Tool/KitKit
-
Trigger TypeSequential Actuation
-
Collation Angle34 deg
-
Collation TypeAngled Strip
-
TypeOil Free Pneumatic
-
Handle TypeStretch Comfort Grip
-
Air Flow Rate3.87 scfm
-
Air Inlet1/4 in NPT
-
Air Pressure70 to 120 psi
-
SeriesFinishPro®42XP
-
Housing MaterialMagnesium
-
Dimensions13 in L x 3-1/2 in W x 11-1/4 in H
-
Exhaust LocationAdjustable
- Never-Lube® design, no oil required
- EZ-Clear™ latch virtually eliminates downtime caused by fastener jams
- High-strength driver with threaded connection
- Metal cylinder for increased durability
| Cross-Reference Number |
|---|
| 355259 |
-
UNSPSC27131506
-
Warranty5 Years
-
Instruction/Installation Manual
Recently Viewed
SENCO® 4G0001N Oil Free Pneumatic Finish Nailer Kit, 15 ga x 1-1/4 to 2-1/2 in L Fastener, Angled Strip Collation, 104 Magazine, 70 to 120 psi
The FinishPro® 42XP has established itself as the marquee tool for professional finish carpenters. The FinishPro® 42XP has great durability and superior performance.
Browning® 1060730 Type 16 Arm Multiple Sheave, 3/4 to 2-11/16 in Split Taper Bore, 8 in OD, 2 Grooves, 7.95 in Dia Pitch, 1-3/32 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission PowerGrip® HTD® 159-3M-15 Synchronous Belt, 15 mm W, 159 mm OAL, 3 mm Pitch, 53 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
TCM23302VH>
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
HCI Preferred Supplier 28145 Long Pipe Nipple, 1/4 in Nominal, 2 in L, Brass, NPTF End Style
HCI Preferred Supplier 28145 Long Pipe Nipple, 1/4 in Nominal, 2 in L, Brass, NPTF End Style
