Milwaukee 15-AMP CORE DRILL MOTORS MWK 4090
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
-
BrandMilwaukee®
-
UPC045242009350
-
Manufacturer Part Number4090
-
CountryUSA|Canada
-
Tool/KitKit
-
Voltage Rating120 VAC
-
Cord Type2.79 ft Corded
-
Amperage Rating15 A
-
Horsepower2-1/2 hp
-
Housing MaterialMetal
-
Dimensions8 in D
-
Speed375 to 750 rpm
- Shear pin protection protects gears and motor
- Built-in water swivel
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 38D741 |
-
Alternative Part Number8564501
-
UNSPSC27112703
-
IDEA Index ID8564501
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years
-
Instruction/Installation Manual
Recently Viewed
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
Milwaukee® 23-66-0020 Switch, For Use With 6175 14 in Cut-Off Machine
6 X 3 BLACK BUTT WELD REDUCER - FIT6X3BWR>
CONSOLIDATED BRG MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
CONS MI-20-N MI Needle Roller Bearing, 1-1/4 in Dia Bore, 1-1/2 in Dia Outside, 1 in W
Milwaukee® 49-57-8215 Quick-Change Hole Saw Cutter, 1-1/8 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution.
BBI 489102 Fully Threaded Carriage Bolt, 7/16-14, 2-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
BBI 489102 Fully Threaded Carriage Bolt, 7/16-14, 2-1/2 in L Under Head, Low Carbon Steel, A Grade, Zinc CR+3
