Electric Coring Motors
2HP, 3PH, 145-TC, 1750-RPM AC MOTOR-BLDIDM3587T>
20HP, 3-PH,254-JM, 3525-RPM MOTOR-BLDJMM2514T>
1/4-HP, 1-PH, 56-C, 1725-RPM AC MOTOR-BLDKL3403>
5-HP 3-PHASE 184-T 1750-RPM AC MOTOR - BLDM3218T>
2HP, 3PH, 145-T, 3450-RPM AC MOTOR-BLDM3555T>
1HP 3PH 184-C 1140 RPM ELECTRIC MOTOR-BLDM3604>
Milwaukee® 4004-20 Diamond Coring Motor, 300 to 600 rpm Speed, 4.8 hp, 120 VAC, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.
Milwaukee® 4079 Diamond Coring Motor, 300 to 600 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.
Milwaukee® 4090 Diamond Coring Motor, 375 to 750 rpm Speed, 2-1/2 hp, 120 VAC, Metal Housing, 15 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
Milwaukee® 4094 Diamond Coring Motor, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.
Milwaukee® 4096 Diamond Coring Motor With Clutch, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
1/4-HP 3-PH 56-C 1750-RPM AC MOTOR-BRWU14S2ACR >
3/4HP, 3PH, 56C, 1725-RPM MOTORS-BLDVBM3546>
3/4-HP 3-PHASE 56-C 1725-RPM MOTOR - BLDVBM3542>
3/4-HP,3-PH, 56-C, 1725-RPM MOTORS-BLDVBM3546>
2HP,3PH,56C, 1725-RPM AC MOTOR-BLDVBM3558>
3HP, 3PH, 182-TC 1725RPM AC MOTOR-BLDVM3611T>
1HP,3PH,143-T,1725-RPM AC MOTOR-BLDVEM3546T>
1/2-HP, 1-PH, 56-C, 1725-RPM MOTORS-BLDVL3504>
1-1/2-HP 3-PHASE 56-C 1725-RPM MOTOR - BLDVM3554>
1-1/2HP, 3-PH 145-TC 1725-RPM MOTOR-BLDVM3554T>
2H, 3PH, 56-C, 1725-RPM AC MOTOR-BLDVM3558>
3HP, 3PH, 182-TC, 1725-RPM AC MOTOR-BLDVM3611T>
5HP, 3PH, 184-T, 1725-RPM AC MOTOR-BLDBM3614T>
Recently Viewed
This is a specific 3/4" industrial service pump wrench. Armstrong Tools was a legendary American manufacturer known for its durable, professional-grade hand tools before the brand was discontinued by Apex Tool Group. Design: Features a thin-pattern, C-shaped head geometry designed specifically for tightening jam nuts or working in highly restricted clearances. Material: Built from drop-forged, through-hardened alloy steel finished with polished nickel-chrome plating for exceptional corrosion protection. Dimensions: Measures approximately 6-3/8 inches in overall length with a slender head thickness of roughly 1/4 inch.
1/16" X 1/8" COATED AIRCRAFT CABLE (FT)-TCI23002 >
Apex® 49-A-TX-10 Power Drive Bit, T10 Torx® Point, 2-3/4 in OAL, Steel
ALAN 16-TFFN-WHT 16 AWG STRANDED COPPER TFFN/TWEN WIRE, WHITE UL LISTED. GAS & OIL RESISTANT
HIGH QUALITY CONDUCTOR 100% COPPER MADE WITH 16 AWG SOLID COPPER WIRE FOR OPTIMAL ELECTRICAL CONDUCTIVITY. TFFN INSULATION, FLEXIBLE AND DURABLE, SUITABLE FOR VARIOUS ELECTRICAL WIRING PROJECTS, INCLUDING APPLIANCE REPAIR, AUTOMOTIVE, AND INDUSTRIAL APPLICATIONS
-ALE16TFFNWHT >
Browning® 1296524 T55L Automatic Torque Limiter, 1-3/8 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Gates® Power Transmission PowerGrip® HTD® 510-3M-09 Synchronous Belt, 9 mm W, 510 mm OAL, 3 mm Pitch, 170 Teeth, Neoprene
PowerGrip® HTD® belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts.
