Electric Coring Motors

5HP, 3PH, 184-T, 1725-RPM AC MOTOR-BLDBM3614T>

3HP, 3PH, 182-TC, 1725-RPM AC MOTOR-BLDVM3611T>

2H, 3PH, 56-C, 1725-RPM AC MOTOR-BLDVM3558>

1-1/2HP, 3-PH 145-TC 1725-RPM MOTOR-BLDVM3554T>

1-1/2-HP 3-PHASE 56-C 1725-RPM MOTOR - BLDVM3554>

1/2-HP, 1-PH, 56-C, 1725-RPM MOTORS-BLDVL3504>

1HP,3PH,143-T,1725-RPM AC MOTOR-BLDVEM3546T>

3HP, 3PH, 182-TC 1725RPM AC MOTOR-BLDVM3611T>

2HP,3PH,56C, 1725-RPM AC MOTOR-BLDVBM3558>

3/4-HP,3-PH, 56-C, 1725-RPM MOTORS-BLDVBM3546>

3/4-HP 3-PHASE 56-C 1725-RPM MOTOR - BLDVBM3542>

3/4HP, 3PH, 56C, 1725-RPM MOTORS-BLDVBM3546>

1/4-HP 3-PH 56-C 1750-RPM AC MOTOR-BRWU14S2ACR >

Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.

Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.

Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.

1HP 3PH 184-C 1140 RPM ELECTRIC MOTOR-BLDM3604>

2HP, 3PH, 145-T, 3450-RPM AC MOTOR-BLDM3555T>

5-HP 3-PHASE 184-T 1750-RPM AC MOTOR - BLDM3218T>

1/4-HP, 1-PH, 56-C, 1725-RPM AC MOTOR-BLDKL3403>

20HP, 3-PH,254-JM, 3525-RPM MOTOR-BLDJMM2514T>

2HP, 3PH, 145-TC, 1750-RPM AC MOTOR-BLDIDM3587T>