Milwaukee 20-AMP CORE DRILL MOTORS MWK 4094
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.
-
BrandMilwaukee®
-
UPC045242009404
-
Manufacturer Part Number4094
-
CountryUSA|Canada
-
Tool/KitKit
-
Voltage Rating120 VAC
-
Cord Type2 ft Corded
-
Amperage Rating20 A
-
Horsepower4.8 hp
-
Housing MaterialMetal
-
Speed450 to 900 rpm
- Shear pin protection, protects gears and motor
- Built-in water swivel
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 38D742 |
-
Alternative Part Number8564517
-
UNSPSC27112703
-
IDEA Index ID8564517
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years
-
Instruction/Installation Manual
Recently Viewed
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.
1" SQUARE BOOM MOUNT CLAMP--2 PACK - VALBCS100CSK>
WIRE KITS-RED3430Y >
Dichtomatik S70114 O-Ring, 114 Dash Number, 0.612 in ID x 0.818 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Weiler® 42025 Threaded Tip Push Broom, 18 in OAL, 3-1/4 in L Trim, Maroon Polypropylene Bristle
Weiler® 42025 Threaded Tip Push Broom, 18 in OAL, 3-1/4 in L Trim, Maroon Polypropylene Bristle
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
