Jet Tools 3-TON 5'-LIFT LEVER HOISTS JET 187715
JET® JLP-A Series Lever Hoists combine safety, reliability, and durability that are designed to perform in light to medium-duty industrial applications. The patented Brake Wear Indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A Lever Hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). The JET® JLP-A Series is the perfect choice for a contractor grade Lever Hoist.
-
BrandJET®
-
UPC731325473261
-
Manufacturer Part NumberJT9-287800
-
CountryUSA
-
Load Capacity3 ton
-
Chain MaterialGrade 80 Alloy
-
Pull to Lift Rated Load71 lb
-
Minimum Between Hooks18.89 in
-
TypeContractor Grade
-
SeriesJLP-A
-
Hook Opening2.46 in
-
Brake TypeDual Pawl Weston
-
Lever Length16-1/7 in
-
Lifting Height5 ft
- Weston style dual pawl brake system double pawl design increases safety
- Alloy steel hooks industrial rated hooks rotate 360 degrees for easy rigging, hooks slowly stretch to indicate an overload situation increasing jobsite safety
- Safety, reliability and durability
- Needle bearing design promotes long hoist life with low wear reducing downtime
- Grade 80 load chain grade 80 black oxide coated load chain for durability
- All steel construction with impact resistant covers that provide durability and protection
- Compact design- smaller body and lightweight design for low headroom applications and use in confined areas
- 1 falls
- 2/3 in lift per turn
- 18-8/9 in headroom
- JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading
- Overload protection prevents the lever hoist from lifting or pulling damaging loads above its rated capacity
- 7.88 in overall width
- Certification load tested to 125% of capacity with certificate
- 10 x 30 mm load chain
- Shipyard hooks- blunt tip, point loading hooks virtually eliminate stretched hooks, reducing downtime for maintenance and repair
- No overload protection
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 0576978 |
-
Alternative Part Number287800
-
UNSPSC31162604
-
Standards/ApprovalsANSI/ASME B30.21 and HST-3 Standards|OSHA regulations
-
Owners/User Manual
Recently Viewed
JET® JLP-A Series Lever Hoists combine safety, reliability, and durability that are designed to perform in light to medium-duty industrial applications. The patented Brake Wear Indicator increases safety by letting you know when to replace the friction disks. JET® also offers the option of shipyard hooks, virtually eliminating stretched hooks caused by point or tip loading. The JET® JLP-A Lever Hoist is available in ¼ ton to 6 ton capacities with standard lifts of 5, 10, 15, and 20 feet (custom lifts available). The JET® JLP-A Series is the perfect choice for a contractor grade Lever Hoist.
The Power-Stud®+ SD1 anchor is a fully threaded, torque controlled, wedge expansion anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance.
HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
Wilton 140 Xtra deep reach carriage c-clamps are ideal for light industrial, woodworking and repair applications. They feature throat depths up to 6-1/4 in, a black oxide coating, oscillating head and sliding cross pin handle.
Browning® 1227917 Minimum Plain Bore Straight Pinion Gear, Bevel Gear, 16 Diametral Pitch, 20 deg Pressure Angle, 16 Teeth, 1 in Dia Pitch, 0.35 in W Face, 3/8 to 7/16 in Dia Bore, Steel
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have helical teeth and the angle is called the helix angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
