POWERS 3/8" X 5" ZINC CONCRETE ANCHORS PWR 7416
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
-
BrandDeWALT®
-
UPC075352775852
-
Manufacturer Part Number7416SD1
-
CountryUSA|Canada
-
FinishZinc Plated
-
Tensile Strength2685 lb
-
Thread Length3-5/8 in
-
MaterialCarbon Steel
-
Thread Size3/8-16
-
Thread TypeUNC
-
Maximum Work Thickness3 in
-
Minimum Embedment Depth1-5/8 in
-
TypeExpansion
-
Head TypeHex
-
SeriesSD1
-
Shear Strength2540 lb
-
Diameter3/8 in
-
Drill Size3/8 in
-
Overall Length5 in
- Consistent performance in high and low strength concrete
- Length ID code and identifying marking stamped on head of each Anchor
- Ultimate load capacity: 2240 lb tensile strength when embedded in 2500 psi, 2685 lb tensile strength when embedded in 3000 psi and 3100 lb tensile strength when embedded in 4000 psi compressive strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
- Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
-
Alternative Part Number7416SD1-PWR
-
UNSPSC31162102
-
Package Description50/BX
-
Standards/ApprovalsICC-ES AC01, ESR-2818/2966|UL Listed|2015 IBC/IRC|ACI 318-14 Chapter 17|ACI 318-11/08 Appendix D|ACI 355.2|ASTM E488|Evaluated and Qualified by an Accredited Independent Testing Laboratory|FM Approved|ICC-ES AC193|UL EX1289
-
Catalog
-
Specification Sheet
Recently Viewed
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
HCI Preferred Supplier 17189N Tube-to-Pipe Connector, 3/8 in Nominal, Compression x MIP End Style, Nylon
HCI Preferred Supplier 17189N Tube-to-Pipe Connector, 3/8 in Nominal, Compression x MIP End Style, Nylon
DAP 33® glazing is a ready to use glazing compound that may be used for face glazing wood or metal sash. Its knife grade consistency allows for smooth, easy applications and sticks tightly to glass and sash while resisting sagging, shrinking and cracking. This product is designed for both interior and exterior use.
EATON B-LINE CONDUIT/PIPE CLAMP, 2-PIECE, SERIES: B-2000, 1/2" CONDUIT, 16 GA TICHKNESS, CHANNEL MOUNTING, FOR USE WITH" PVC COATED RIGID CONDUIT/CLAMP, STEEL, ZINC PLATED
12MP-12MP-12FP 3/4" RUN HYD/TEES-DAY560312>
