HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
-
BrandGeneric
-
Manufacturer Part Number24043232
-
CountryUSA
-
MaterialSteel
-
Pressure Rating1500 psi
-
TypeStraight
-
Nominal Size2 in x 2-1/2-12
-
End Style37 deg SAE Male JIC Flare x MNPT
- Flared fitting or tube assembly is tightened against the cone with a swivel nut
- By forcing the flare against the cone during the torquing process, the nose cone is slightly deformed and meshes to create a metal to metal seal between the flare and the cone
-
UNSPSC27121700
-
Package Description1/PK
-
Catalog
Recently Viewed
HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 24043232 Straight Connector, 2 in x 2-1/2-12 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
Wilton 140 Xtra deep reach carriage c-clamps are ideal for light industrial, woodworking and repair applications. They feature throat depths up to 6-1/4 in, a black oxide coating, oscillating head and sliding cross pin handle.
Browning® 1227917 Minimum Plain Bore Straight Pinion Gear, Bevel Gear, 16 Diametral Pitch, 20 deg Pressure Angle, 16 Teeth, 1 in Dia Pitch, 0.35 in W Face, 3/8 to 7/16 in Dia Bore, Steel
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have helical teeth and the angle is called the helix angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
HCI Preferred Supplier 240466 Straight Connector, 3/8 in x 9/16-18 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
HCI Preferred Supplier 240466 Straight Connector, 3/8 in x 9/16-18 Nominal, 37 deg SAE Male JIC Flare x MNPT, Steel
