U.S. Tsubaki Power Transmission
Tsubaki® DS80ATL17 Type A Double Single Roller Chain Sprocket, 2-1/2 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, 1 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS80A14 Type A Double Single Roller Chain Sprocket, 1 in Dia Bore, 4.98 in OD, 80 Chain, 14 Teeth, 1 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS50A17 Type A Double Single Roller Chain Sprocket, 5/8 in Dia Bore, 3.72 in OD, 50 Chain, 17 Teeth, 5/8 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® DS40A15 Type A Double Single Roller Chain Sprocket, 1/2 in Dia Bore, 2.65 in OD, 40 Chain, 15 Teeth, 1/2 in Pitch, Carbon Steel
This type of sprocket is commonly used in applications where two or more items are powered by a common drive shaft. The space between the sprocket plates is wider than a multi-strand sprocket and allows two separate strands of chain to engage without contacting each other. With this type of sprocket, one strand of chain may exit in a different direction than the other. For example, one strand exiting towards the ceiling and the other running parallel to the floor.
Tsubaki® D100R18 Double Strand Roller Chain Sprocket, 7.839 in OD, #100 Chain, 18 Teeth, Carbon Steel
Keep your system on the cutting edge with Tsubaki®, LLC. sprockets and discover the difference quality makes. Tsubaki® sprockets are manufactured from top-grade , heat treated steel to withstand heavy shock loading, resist abrasion.
Tsubaki® C80RB Straight Side Bar Chain, 10 ft OAL
Tsubaki® C80RB Straight Side Bar Chain, 10 ft OAL
Tsubaki® C2080HRB Double Pitch Conveyor Chain, 10 ft OAL, 2 in Pitch, 5/8 in Dia x 5/8 in W Roller, 0.156 in THK Plate
These chains provide a high quality conveying medium for material handling equipment, road building machinery, textile machinery, farming implements, baking, packaging and bottling equipment.
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HCL Double Pitch Standard Connecting Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HCL Double Pitch Standard Connecting Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2060HSA1CL Double Pitch Standard Connecting Link, C2060H Chain, 1-1/2 in Pitch, 1.224 in OAW, 0.235 in Dia Pin, Carbon Steel
Tsubaki® C2060HSA1CL Double Pitch Standard Connecting Link, C2060H Chain, 1-1/2 in Pitch, 1.224 in OAW, 0.235 in Dia Pin, Carbon Steel
Tsubaki® BL1444 Heavy Duty Leaf Chain, 10 ft OAL, 1-3/4 in Pitch
Tsubaki® BL1444 Heavy Duty Leaf Chain, 10 ft OAL, 1-3/4 in Pitch
Tsubaki® BB30 Cam Clutch, 1.181 in Dia Bore, 2.441 in OD, 0.63 in W, 103.3 ft-lb Load
BB series cam clutches are a combination of a 62 series ball bearing and a cam style clutch. These units are designed for press fit applications and are available in five variations, combinations of metal shield or dust protective sealed type and with or without keyways on the inner and/or outer race to allow design and application flexibility. BB series units come grease lubricated but metal shielded style can be adapted for oil bath lubrication.
Tsubaki® 80SA1CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80SA1CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80R50 Single Strand Roller Chain, 50 ft OAL, 1 in Pitch, 0.63 in Dia Roller, 1.398 in W Roller, Carbon Steel
Tsubaki® 80R50 Single Strand Roller Chain, 50 ft OAL, 1 in Pitch, 0.63 in Dia Roller, 1.398 in W Roller, Carbon Steel
Tsubaki® 80D3CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 80D3CL Connecting Link, #80 Chain, 1 in Pitch, 1.398 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® 50SA1CL Connecting Link, #50 Chain, 5/8 in Pitch, 0.874 in OAW, 0.2 in Dia Pin, Carbon Steel
Tsubaki® 50SA1CL Connecting Link, #50 Chain, 5/8 in Pitch, 0.874 in OAW, 0.2 in Dia Pin, Carbon Steel
Tsubaki® 50D14LRB Single Pitch Standard Attachment Chain, 10 ft OAL, 5/8 in Pitch, 0.4 in Dia x 3/8 in W Roller, Carbon Steel
Tsubaki® 50D14LRB Single Pitch Standard Attachment Chain, 10 ft OAL, 5/8 in Pitch, 0.4 in Dia x 3/8 in W Roller, Carbon Steel
Tsubaki® 25R100 Chain, 100 ft OAL, 1/4 in Pitch, 0.091 in Dia x 1/8 in W Roller, Carbon Steel
Tsubaki® 25R100 Chain, 100 ft OAL, 1/4 in Pitch, 0.091 in Dia x 1/8 in W Roller, Carbon Steel
Tsubaki® 25CL Single Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25CL Single Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25-2CL Double Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Tsubaki® 25-2CL Double Strand Connecting Link, #25 Chain, 1/4 in Pitch, 0.091 in Dia Pin, Carbon Steel
Recently Viewed
ITM 201SD6364 Bit Shank Drill, 63/64 in Drill - Fraction, 1.0625 Drill - Decimal Inch, 1/2 in Shank, M2 HSS
ITM 201SD6364 Bit Shank Drill, 63/64 in Drill - Fraction, 1.0625 Drill - Decimal Inch, 1/2 in Shank, M2 HSS
