Tsubaki® BB30 Cam Clutch, 1.181 in Dia Bore, 2.441 in OD, 0.63 in W, 103.3 ft-lb Load
BB series cam clutches are a combination of a 62 series ball bearing and a cam style clutch. These units are designed for press fit applications and are available in five variations, combinations of metal shield or dust protective sealed type and with or without keyways on the inner and/or outer race to allow design and application flexibility. BB series units come grease lubricated but metal shielded style can be adapted for oil bath lubrication.
-
BrandTsubaki®
-
UPC097039776419
-
Manufacturer Part NumberBB30
-
CountryUSA
-
Load Capacity103.3 ft-lb
-
Temperature Rating-30 to 100 deg C
-
Maximum Speed2000 rpm Inner Race Overrunning/1100 rpm Outer Race Overrunning
-
Width0.63 in
-
SeriesBB
-
Outside Diameter2.441 in
-
Bore Diameter1.181 in
-
UNSPSC26111908
-
Catalog
-
Specification Sheet
Recently Viewed
Tsubaki® BB30 Cam Clutch, 1.181 in Dia Bore, 2.441 in OD, 0.63 in W, 103.3 ft-lb Load
BB series cam clutches are a combination of a 62 series ball bearing and a cam style clutch. These units are designed for press fit applications and are available in five variations, combinations of metal shield or dust protective sealed type and with or without keyways on the inner and/or outer race to allow design and application flexibility. BB series units come grease lubricated but metal shielded style can be adapted for oil bath lubrication.
MasterDrive L075-20MM L075 Standard Jaw Coupling, 20 mm Dia Bore, 0.82 in L Through Bore, 1.75 in Dia Hub, Powdered Metal
Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an elastomer or bronze element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails.
Browning® Gearbelt® 3513017 Solid Type EF Synchronous Timing Pulley With Flange, 1/2 to 1-1/4 in QD® Bore, 2.357 in OD, 20 Grooves, 2.387 in Dia Pitch, 3/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
Browning® Gearbelt® 3513827 Type B Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-5/16 in W Face
Browning® Gearbelt® 3513827 Type B Arm Synchronous Timing Pulley, 1/2 to 2-15/16 in QD® Bore, 9.495 in OD, 60 Grooves, 9.549 in Dia Pitch, 1-5/16 in W Face
Browning® Gearbelt® 3513470 Type B Arm Synchronous Timing Pulley, 1/2 to 2 in QD® Bore, 8.564 in OD, 72 Grooves, 8.594 in Dia Pitch, 1-1/4 in W Face
Browning® Gearbelt® 3513470 Type B Arm Synchronous Timing Pulley, 1/2 to 2 in QD® Bore, 8.564 in OD, 72 Grooves, 8.594 in Dia Pitch, 1-1/4 in W Face
Browning® Gearbelt® 3513363 Solid Type EF Synchronous Timing Pulley With Flange, 1/2 to 1-1/4 in QD® Bore, 2.596 in OD, 22 Grooves, 2.626 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
