Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
-
BrandTsubaki®
-
UPC097039181480
-
Manufacturer Part NumberC2080HOL
-
CountryUSA
-
Link Plate Thickness0.157 in
-
Pitch2 in
-
MaterialCarbon Steel
-
Chain SizeC2080H
-
TypeDouble Pitch Standard
-
Overall Width1.543 in
-
Pin Diameter0.313 in
-
Link Plate Height0.906 in
-
UNSPSC31151609
-
WarrantyLimited
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Tsubaki® C2080HOL Double Pitch Standard Offset Link, C2080H Chain, 2 in Pitch, 1.543 in OAW, 0.313 in Dia Pin, Carbon Steel
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning® 1176817 Double Single Strand Type DS-2 Roller Chain Sprocket With Hardened Teeth, 3/4 to 2-11/16 in Dia Bore, 5.95 in OD, 80 Chain, 17 Teeth, 1 in Pitch, Steel
Browning® stock double single sprockets with Split-Taper® bushings are for use with two single strand chains, normally one drive chain and one driven chain as on roll case drives or live roller conveyor drives. They are made of steel, have hardened teeth and are ready to use right off the shelf. No reworking is necessary since they use Browning® Split-Taper® bushings.
