Regal Rexnord
Sealmaster® 705619 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-7/16 in Dia Bore, 2-3/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-3/4 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
Sealmaster® 758038 Closed Snap On End Cap Assembly, Polypropylene Housing
End caps provide a guard from rotating shafts and conform to OHSA requirements for personal protection. In addition, these accessories together can better protect against high pressure wash down and help reduce bearing moisture contact.
T.B. Woods #12 S-FLEX HYTREL COUPLING INSERTS TBW 12-H
Our new Sure-Flex® Plus EPDM and neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment and end float. With Sure-Flex® couplings, the need for lubrication and maintenance is eliminated.
T.B. Woods #8-SC-35 COUPLING SPACER FLANGES TBW 8-SC-35
TB Wood's® Sure-Flex® Plus 8SC35 Bore-To-Size Type SC Spacer Flange, 08 Coupling, 1-7/8 in Bore Dia, 1-5/8 in Length Through Bore, 3-1/4 in Hub Dia, Cast Iron
T.B. Woods 1-1/4"-ID S-FLEX COUPLING HALFS TBW 6-S-1-1/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-1/4"-ID S-FLEX COUPLING HALFS TBW 7-S-1-1/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-1/8"-ID S-FLEX COUPLING HALFS TBW 5-J-1-1/8
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 1-1/8"-ID/BORE #8-SCH SPACER HUBS TBW 8-SC-H-1-1/8
TB Wood's® Sure-Flex® Plus 8SCH118 Bore-To-Size Type SC Spacer Hub, 08 Coupling, 1-1/8 in Bore Dia, 1-23/32 in Length Through Bore, 3-1/4 in Hub Dia, Cast Iron
T.B. Woods 1-11/16"-ID QD E-STYLE BUSHINGS TBW E-1-11/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 1-15/16"-ID QD E-STYLE BUSHINGS TBW E-1-15/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 1-5/8" S-FLEX COUPLING HALFS TBW 6-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-5/8"-ID 7-SCH HUBS TBW 7-SCH-1-5/8
TB Wood's® Sure-Flex® Plus 7SCH158 Bore-To-Size Type SC Spacer Hub, 07 Coupling, 1-5/8 in Bore Dia, 1-15/32 in Length Through Bore, 2-13/16 in Hub Dia, Cast Iron
T.B. Woods 1-5/8"-ID S-FLEX COUPLING HALFS TBW 7-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1-5/8"-ID S-FLEX COUPLING HALFS TBW 9-S-1-5/8
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 1/2"-ID S-FLEX COUPLING HALFS TBW 4-J-1/2
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 14-MM-PITCH X 3360-MM TIMING BELTS TBW 3360-14-M-65-W
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
T.B. Woods 2-1/2"-ID S-FLEX COUPLING HALFS TBW 9-S-2-1/2
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 2-7/16"-ID QD E-STYLE BUSHINGS TBW E-2-7/16
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 22-MM-ID QD QT-STYLE BUSHINGS TBW Q-T-22-MM
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
T.B. Woods 3/4"-ID S-FLEX COUPLING HALFS TBW 4-J-3/4
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 3/4"-ID S-FLEX COUPLING HALFS TBW 5-J-3/4
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
T.B. Woods 3/4"-ID/BORE S-FLEX COUPLING HALFS TBW 7-S-3/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
T.B. Woods 32-TOOTH 8-MM-PITCH T/BELT SHEAVES TBW P-32-8-M-30
TB Wood's® Synchronous Plus synchronous drives offer the added flexibility of a dual sprocket design that features both metric and standard-tapped holes coupled with a high capacity Synchronous Plus belt. As a result, the Synchronous Plus drive offers a significantly higher horsepower rating at the standard industry price.
T.B. Woods 7-HS COUPLING INSERTS TBW 7-HS
Our new Sure-Flex® Plus EPDM and neoprene sleeves are best-in-class for coupling performance and value. Their 4-way flexing action absorbs virtually all types of shock, misalignment and end float. With Sure-Flex® couplings, the need for lubrication and maintenance is eliminated.
Recently Viewed
Browning® 1293570 Standard Riveted Roller Chain, 1 in Pitch, 5/8 in Dia x 5/8 in W Roller, Steel
7/16"-SHANK HOLESAW ARBORS-GRN38506>
1-OZ SOUFFLE PORTION CUPS--CS/5000-SOLP100 >
Klein® Cushion-Grip® 630-1/4M Magnetic Tip Nutdriver, 1/4 in, Hollow Shank, Cushion Grip Handle, ANSI/ASME Specified, Polished Chrome
The full hollow shaft design with rare earth magnetic tip facilitates work on hard to reach bolt applications. Klein® exclusive cushion grip handle offers greater torque and outstanding comfort. The patented Tip-Ident® quickly identifies nut driver and size.
18" X 27" X 16" X 6" AIR/COND COVERS-JWH288756>
RECEIVER TUBE SILENCER PAD-REDTS35020 >
