T.B. Woods 3/4"-ID/BORE S-FLEX COUPLING HALFS TBW 7-S-3/4
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
-
BrandTB Wood's®
-
UPC698672640312
-
Manufacturer Part Number7S34
-
CountryUSA
-
MaterialCast Iron
-
Maximum Speed5250 rpm
-
TypeBore-To-Size Type S
-
Screw Size5/16-18 UNC x 3/4 in L Setscrew
-
Coupling Size07
-
Hub Diameter2-13/16 in
-
Hub Length1 in
-
Keyway Size3/16 x 3/32 in
-
Length Through Bore1-27/32 in
-
Bore Diameter3/4 in
-
UNSPSC31163000
-
Standards/ApprovalsATEX Compliant|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Type S flanges sizes 6 through 16 are manufactured of high strength cast iron then bored-to-size for slip fit on standard shafts. Size 5 is made of sintered carbon steel. Flanges are easy to install and remove, and are stocked in a wide range of bore sizes. All sleeve materials may be used with type S flanges.
1/2" -FEMALE PIPE THREAD GATE VALVE-NIBT181/2 >
Browning® 1297407 Double Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.66 in OD, 80-2 Chain, 13 Teeth, 1 in Pitch, Steel
Browning® 1297407 Double Strand Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 4.66 in OD, 80-2 Chain, 13 Teeth, 1 in Pitch, Steel
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
NEEDLE BEARING INNER RACES-MCGMI40>
10" X 1/8" X 5/8" MASONRY/ASPHALT TYPE 1 CUTTING WHEEL-FOR71889 >
