T.B. Woods 1/2"-ID S-FLEX COUPLING HALFS TBW 4-J-1/2
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
-
BrandTB Wood's®
-
UPC698672620062
-
Manufacturer Part Number4J12
-
CountryUSA
-
MaterialSintered Carbon Steel
-
Maximum Speed7600 rpm
-
TypeBore-To-Size Type J
-
Screw Size1/4-20 UNC x 1/2 in L Setscrew
-
Coupling Size04
-
Hub Diameter1-5/8 in
-
Hub Length27/64 in
-
Keyway Size1/8 x 1/16 in
-
Length Through Bore55/64 in
-
Bore Diameter1/2 in
- Type J flanges can be used with EPDM and neoprene sleeves
- Each flange has a standard keyway, one setscrew over the keyway and one setscrew at 90 deg from the keyway
-
UNSPSC31163000
-
Standards/ApprovalsATEX Compliant|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
Milwaukee® 48-13-5620 Heavy Duty Solid Center Ship Auger Bit, 5/8 in Dia, 18 in OAL, 15 in L Spiral Flute, 7/16 in Shank
The Milwaukee® 5/8 in. x 18 in. Ship auger bit drills through up to 2X the nails of competitive auger bits without needing resharpening. Drill into clean or nail-embedded wood with confidence when installing Romex wire, PEX water lines, rebar, bolts, and rope in piers, playground equipment and landscaping. The flutes are wider for maximum chip removal, even in deep holes. The polished and coated flute finish means chips won't stick to the bit, even when drilling in material that contains sap or glue. The through-center cutting design creates a more solid striking point against nails compared to the competitions' ahead-of-center and behind-center designs. The longer shaft length makes it easy to drill deeper or overhead without an extension.
Browning® 1069863 Split Taper Bushing With Keyway, 30 mm Dia Bore, 1.8555 in Small End/1.9375 in Large End Dia Barrel, 3 in Dia Flange, 49.2125 mm OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
5/16" X 6" ZINC-PLATED EYEBOLT-NTL124065 >
BBI 398120 Flat Washer, 1/2 in, 1-1/4 in OD, 0.078 in THK, Stainless Steel
Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019774 Chain Shackle, 1.5 ton Load, 7/16 in, 1/2 in Dia Bolt Pin, Hot Dipped Galvanized
