T.B. Woods 14-MM-PITCH X 3360-MM TIMING BELTS TBW 3360-14-M-65-W
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
-
BrandTB Wood's®
-
UPC698672616324
-
Manufacturer Part Number336014M65W
-
CountryUSA
-
Pitch14 mm
-
Temperature Range-35 to 200 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
ColorBlack/Blue
-
TypeSingle Sided
-
Width65 mm
-
Number of Teeth240
-
Overall Length3360 mm
- Oil resistant
- Transmit more horsepower per inch of belt width
- This cross-linked elastomer is formulated to resist tooth deformity and increase tooth rigidity, increasing belt life and decreasing replacement costs, its chemical stability resists the effects of oils, coolants, heat and ozone
- The QT power Chain® tooth profile resists ratcheting and provides accurate positioning for synchronous drive applications
- The tensile members provide excellent dimensional stability and high impact strength
- Operating at a consistent tension, QT power Chain® requires little retensioning and less drive maintenance
- Designed for higher loads and abrasion resistance, the facing provides a reduced coefficient of friction so that the belt meshes easier with pulleys
-
UNSPSC26111811
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
TB Wood's® QT Power Chain® synchronous belt drives are constructed with materials of the highest quality and strength. Extensive development performed by research and development has resulted in the homogeneous integration of all components, the cohesive bond of which imparts superior torque capacity giving QT Power Chain® drives the ability to exceed the performance of existing belt drives and compete with chain and other mechanical systems.
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
P28-14M-55-2012 Dodge® 112922 HT250 Type A1F High Torque Belt Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 4.802 in OD, 28 Grooves, 4.912 in Dia Pitch, 2-3/4 in W Face
4-OZ SIL-GLYDE LUBRICANT-AGSSG4 >
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
P72-8M-30-2517 Dodge® 112881 HT250 Type B1F High Torque Belt Sprocket, 1/2 to 2-11/16 in Taper-Lock® Bore, 7.164 in OD, 72 Grooves, 7.218 in Dia Pitch, 1-1/2 in W Face
Sealmaster® 705619 FB-T Non-Expansion Standard Duty Round/Straight Bore Ball Bearing Unit With Flinger, 1-7/16 in Dia Bore, 2-3/8 in L Bolt Center-to-Center, 3-Bolt Flange Mount, 3-3/4 in OAL/Dia
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
