TB Wood's® Sure-Flex® Plus 5J118 Bore-To-Size Type J Sleeve Coupling Flange, 05 Coupling, 1-1/8 in Bore Dia, 1-3/64 in Length Through Bore, 1-7/8 in Hub Dia, Sintered Carbon Steel
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
-
BrandTB Wood's®
-
UPC698672620185
-
Manufacturer Part Number5J118
-
CountryUSA
-
MaterialSintered Carbon Steel
-
Maximum Speed7600 rpm
-
TypeBore-To-Size Type J
-
Screw Size5/16-18 UNC x 1/4 in L Setscrew
-
Coupling Size05
-
Hub Diameter1-7/8 in
-
Hub Length29/64 in
-
Keyway Size1/4 x 1/8 in
-
Length Through Bore1-3/64 in
-
Bore Diameter1-1/8 in
- Type J flanges can be used with EPDM and neoprene sleeves
- Each flange has a standard keyway, one setscrew over the keyway and one setscrew at 90 deg from the keyway
-
UNSPSC31163000
-
Includes(2) Setscrew
-
Standards/ApprovalsATEX Compliant|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
1/8"-ID NO/KW JAW COUPLING HALFS-LOVL035X1/8>
23-TOOTH #40-1 CHAIN SPROCKETS IDC 40-B-23-F-3/4
23 TOOTH SPROCKETS FOR #40 CHAIN
Gates® Power Transmission Micro-V® 300J16 Heavy Duty V-Belt, J Section, 3/32 in W Top, 30 in L Outside, 5/32 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Sealmaster® 702313 MPD Medium Duty Pillow Block Ball Bearing Unit, 2-15/16 in Dia Bore, 7-7/8 to 10-1/8 in L Bolt Center-to-Center, 3-1/2 in Base to Bore Centerline, 13 in OAL x 7-1/4 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
16-MM-ID JAW COUPLING HALFS-LOVL070X16MM>
