RBC Bearings Incorporated
RBC Bearings 1" X 2" UNGROUND BALL BEARINGS RBC 5418-VMF-53
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
RBC Bearings 1"-ID NEEDLE BEARING INNER RACES RBC IR-7234
RBC® IR7234 Pitchlign® Heavy Duty Inner Ring, 1 in ID x 1-1/4 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 1"-ID NEEDLE BEARING INNER RACES RBC IR-7235
RBC® IR7235 Pitchlign® Heavy Duty Inner Ring, 1 in ID x 1-1/4 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 1"-OD CROWNED HEX CAM FOLLOWERS RBC C-S-32-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 1"-OD CROWNED YOKE ROLLERS RBC C-Y-32-L
RBC® CY32L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/16 in Dia Bore, 1 in Dia x 5/8 in W Roller, 6150 lb Load, Chrome Steel Roller
RBC Bearings 1"-OD ECC STUD HEX CAM FOLLOWERS RBC S-32-LW-X
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 1"-OD HEAVY HEX CAM FOLLOWERS RBC H-32-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 1"-OD HEX SEALED CAM FOLLOWERS RBC S-32-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 1"-OD SEALED YOKE ROLLERS RBC Y-32-L
RBC® Y32L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/16 in Dia Bore, 1 in Dia x 5/8 in W Roller, 6150 lb Load, Chrome Steel Roller
RBC Bearings 1/2"-ID FLANGED BALL BEARINGS RBC 5491-VMF-53
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
RBC Bearings 1/2"-OD HEAVY HEX CAM FOLLOWERS RBC H-16-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 2-1/2"-OD SEALED YOKE ROLLERS RBC Y-80-L
RBC® Y80L Universal Series™ Yoke Cylindrical Roller Cam Follower, 3/4 in Dia Bore, 2-1/2 in Dia x 1-1/2 in W Roller, 33000 lb Load, Chrome Steel Roller
RBC Bearings 2-1/4"-OD HEX CAM FOLLOWERS RBC S-72-L
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 2" HEAVY CAM FOLLOWERS RBC H-64-L
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 2"-OD CROWNED HEX CAM FOLLOWERS RBC C-S-64-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 2"-OD HEX SEALED CAM FOLLOWERS RBC S-64-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 2"-OD SEALED YOKE ROLLERS RBC Y-64-L
RBC® Y64L Universal Series™ Yoke Cylindrical Roller Cam Follower, 5/8 in Dia Bore, 2 in Dia x 1-1/4 in W Roller, 21200 lb Load, Chrome Steel Roller
RBC Bearings 3"-ID NEEDLE ROLLER BEARINGS RBC SJ-8517
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings 3"-OD HEAVY HEX CAM FOLLOWERS RBC H-96-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 3/4" X 2" FLANGED BALL BEARINGS RBC 5875-VMF-53
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
RBC Bearings 3/4"-ID NEEDLE BEARINGS RBC SJ-7154
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings 3/4"-OD CROWNED HEX CAM FOLLOWERS RBC C-S-24-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 3/4"-OD ECC STUD HEX CAM FOLLOWERS RBC S-24-LW-X
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 3/4"-OD HEAVY HEX CAM FOLLOWERS RBC H-24-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
Recently Viewed
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
1/2" STRAIGHT LIQ/TIGHT CONNECTORS-ELEILTC50>
McGill® CAGEROL® machined race needle bearings are manufactured from bearing quality steel. Most sizes use crowned or end relieved, rollers to help reduce end stresses and allows for greater misalignment. The rollers are separated by a steel retainer (cage) to help achieve higher speeds and provide a lubricant reservoir. CAGEROL® bearings are constructed with radial lubrication hole and groove on the outer and optional inner raceway (MI series) for relubrication through the housing or shaft. Other options include a variety of seal configurations to either help prevent contaminant entry or contain the lubricant.
STAINLESS STEEL STRAIGHT HOSE-LNC274239 >
Koyo B-1412-OH Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing With Oil Hole, 7/8 in Dia Bore, 1-1/8 in OD, 3/4 in W, 5370 lbf Dynamic/10160 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Koyo B-1416 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1 Row, 1 in W, 7100 lb Dynamic/14570 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
