RBC Bearings 3/4"-OD HEAVY HEX CAM FOLLOWERS RBC H-24-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400005801
-
Manufacturer Part NumberH24LW
-
CountryUSA
-
Load Capacity1800 lb Dynamic/4150 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length3/8 in
-
Thread Size7/16-20 UNF-2A
-
Maximum Speed5000 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter3/4 in
-
Roller MaterialChrome Steel
-
Roller Width1/2 in
-
Head TypeHex
-
SeriesH-LW
-
Stud Diameter7/16 in
-
Stud Length7/8 in
-
Stud MaterialChrome Steel
-
Stud TypeHeavy Duty
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Heavy stud cam followers are designed to provide additional stud strength for applications with high loading or shock loads
- Double sealed to keep grease in and contaminants out
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
1-1/8" ADJUSTABLE LIFT ARM PIN-HIG03002 >
Milwaukee® 44-86-0455 Retainer, For Use With 6880 Serial 630D 10 AWG Nibbler
United Abrasives-SAIT 23230 Type 1 Burr Free Portable Saw Cut-Off Wheel, 7 in Dia x 3/32 in THK, 5/8 in Center Hole, A24R Grit, Aluminum Oxide Abrasive
MCR Safety VCL2MLS Luminator® Standard Safety Vest, Small, Fluorescent Lime, Polyester, Hook and Loop Front Closure, 3 Pockets, ANSI Class: Class 2, ANSI/ISEA 107-2020 Type R
Gates® Power Transmission MegaCrimp™ 4G-2MP G25 Straight Hydraulic Coupling, 1/4 in x 1/8-27 Nominal, Hose x Male NPTF, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
