RBC Bearings 1"-OD ECC STUD HEX CAM FOLLOWERS RBC S-32-LW-X
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400007775
-
Manufacturer Part NumberS32LWX
-
CountryUSA
-
Load Capacity2300 lb Dynamic/4800 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length1/2 in
-
Thread Size7/16-20 UNF-2A
-
Maximum Speed4500 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter1 in
-
Roller MaterialChrome Steel
-
Roller Width5/8 in
-
Head TypeHex
-
SeriesS-LWX
-
Stud Diameter5/8 in
-
Stud Length1 in
-
Stud MaterialChrome Steel
-
Stud TypeStandard
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Heavy stud cam followers are designed to provide additional stud strength for applications with high loading or shock loads
- Standard stud cam followers offer the mounting convenience of a threaded stud and are designed to accommodate moderate loads
- Double sealed to keep grease in and contaminants out
- CamCentric® adjustable cam followers are used where accurate positioning is required
- They are particularly useful for reducing clearance or backlash in opposed arrangements and for assuring load sharing in multiple cam follower installations
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
SPARTA 7" WHITE VAT & CYLINDER BRUSH-FLP4100200 >
Gates® Power Transmission Easy-Splice® BVO/500 Heavy Duty V-Belt, B Section, 21/32 in W Top, 500 ft L Outside, Chloroprene
Easy-Splice V-Belting has dependable, non-slip design with minimal stretch characteristics made to outlast other types of open-end belting.
Remke Tuff-Seal™ 2201-013R Single Eye Single Weave Closed Mesh Standard Duty Wire Mesh Cable Grip, 530 lb Breaking Strength, 0.5 to 0.62 in Cable, Bronze, TiN Coated
Tuff-Seal™ Support Grips are designed to hold the weight of cable that is vertical or sloping. Support grips serve an important function; electrical cables must be supported or their dead weight can cause excessive strain or pullout at the connections resulting in power failure. Tuff-Seal™ Support Grips are woven with non-magnetic, tinned bronze wire that absorbs strain and flexing while resisting cable pull-out, flexing and vibration. These grips are available in a variety of eye styles and cable ranges, can be used either indoors or outdoors and will support cable, metal rods and tubing with loads up to 600 lb.
Milwaukee® M18 FUEL™ 2744-20 Brushless Cordless Framing Nailer, 2 to 3-1/2 in Fastener, For Fastener Type: 21 deg Framing Nailer, 43 lb Magazine, 14.1 in OAL, Battery
The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.
MCR Safety 9478M Regular Weight Protective Sleeve, L, 18 in L, 7 ga Cotton/Polyester, Natural
